Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
2022-612-E-AMS-WB Brawley Company-WCOB 3rd floor renovations aditional upgrades needed
Revised 06/21 ORANGE COUNTY CHANGE ORDER REQUEST NORTH CAROLINA ______________________________________________________________________________________________________________ Date: 10/04/2022 Project: WCOB 3rd Floor Renovation Change Order No. 2 Department: AMS Department Address: PO Box 8181, Hillsborough NC 27278 Project: WCOB 3rd Floor Renovation Contractor: WB Brawley Company Contractor Address: 5121 Kingdom Way, Suite 305 Effective date of original contract: 06/06/2022 This change order increases decreases the contract time by days. Check here if no impact to contract time . Will this change order impact the date of substantial completion? Yes No. If yes, the amended date of substantial completion is: _______________________________________________________________________________________________________________ Full Description of Change: Additional ACT System replacement, Stud cavity repair to accept new walls, Drywall finishing point-up in existing offices prior to painting, material credit for substitution of electrified strikes and related hardware to match existing conditions Reason for Change: See above and attached Change Order Proposal Dated 08/17/2022 _______________________________________________________________________________________________________________ Original contract sum: $ 356554.00 Contract sum prior to this change order: $ 358667.51 Amount of this change order: $ 3612.00 Total sum of the contract including this change order: $ 362279.51 _______________________________________________________________________________________________________________ This change order is executed to amend the contract time or contract sum. It shall not be construed to impact the original contract, project, services, or work in any other manner. All other terms of the Original Contract remain in effect. Approved and executed this 4th day of October, 2022. _______________________________ _____________________________ _____________________________ Contractor Owner Architect (when retained) By:____________________________ By:___________________________ By:___________________________ DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B 11/3/2022 11/21/2022 Revised 06/21 DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Revised 06/21 ORANGE COUNTY—DEPARTMENT USE ONLY _____________________________________________________________________________________________________ Party/Vendor Name: WB Brawley Company Party/Vendor Contact Person: Jeremy Thompson Contact Phone: 919-636-1338 Party/Vendor Address: 5121 Kingdom Way, Suite 305 City Raleigh State: NC Zip: 27607 Department: AMS Amount: 3612.00 Purpose: WCOB 3rd floor Renovations_Additional Upgrades needed Budget Code(s): 61370035-880000-10078 Vendor # 67616 (N/A if new vendor) Vendor is a BOCC consultant? Yes No Contract Type: (Check one) New Renewal Amendment Effective Date Approved by Board Yes No Agenda Date: --- For Section XIV. c. contracts only, Approved by Board in Current FY Budget Yes No This agreement is approved as to technical form and content and I as Department Director affirmatively state work on this project has not been initiated prior to execution of the agreement: Department Director’s Signature ________________________________________ Date: ________ Agreements for emergency services or repair are not subject to the above affirmation. If services related to this agreement have already begun or been completed please briefly describe the nature of the emergency condition that was addressed: Risk Management This agreement is approved for sufficiency of insurance standards, specifications, and requirements: Office of the Risk Management Officer___________________________________ Date: _________ Financial Services This instrument has been pre-audited in the manner required by the Local Government Budget and Fiscal Control Act: Office of the Chief Financial Officer ____________________________________ Date: _________ Legal Services This agreement is approved as to legal form and sufficiency: Office of the County Attorney __________________________________________Date: ________ Clerk to the Board Received for record retention: All Docusign contracts must be copied to the Clerk upon completion: occlerkdocs@orangecountync.gov The following signature block is for hard copies only and is not required for Docusign contracts: Office of the Clerk to the Board __________________________________________Date:_________ DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B 11/2/2022 11/3/2022 11/8/2022 11/17/2022 DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B To:Date:8/26/2022 Project:PCCO #: Project ID#:HH Project #: Contractor:Contractor #: Description of change: GC Materials (Attach list with Qty, Item, Unit $, Unit mh, total mh, OT mh, Total $)SUBTOTALS 1. Total Direct Cost of Materials 0 $0.00 2. Sales Tax (NC, Wake County) 7.25% 0 $0.00 3. Shipping, Transportation, Fees $0.00 4. Total for Materials & Shipping $0.00 5. Overhead and Profit on Item 4 10%$0.00 (10% maximum)$0.00 GC Labor:(Attach list(s) with Labor Scope(s), Labor Rate(s), Labor Hour(s) 6. Total Labor:-$ 7. Total Supervison:-$ 8. Payroll Taxes & Insurance 40.0%$0.00 9. Total Labor + Burden (6+7+8)$0.00 10. Overhead and Profit on Item 9 10.0%$0.00 (10% maximum on straight labor cost, not premium)$0.00 Equipment Rental: (Attach quotes) 11. Equipment Rental (Includes 7.5% Sales Tax, Delivery Fees)$0.00 12. Waste/Dump Fees $0.00 13. Total for Equipment Rental $0.00 14. Overhead and Profit 10.0%$0.00 (10% maximum)$0.00 Subcontractors: (Attach quotes with material and labor backup) 15. Subcontractors ($785.94) 16.Overhead and Profit on Item 15 5.0%($39.30) (5% maximum)($825.24) Subtotal Before Bonds and Insurance ($825.24) GC Bonds and Insurance: 17.Insurance (1% of of direct cost subtotal)($8.25) 18.Bonds (1% of direct cost sustotal)($8.25)o)($16.50) Total:($841.74) Time Extension Request of:0 day(s) is being requested for this change in scope of work. Notice to Proceed Date: 7/11/2022 Original/Revised Contract Days to Complete:120 Original/Revised Substantial Completion Date:11/8/2022 Additional Contract Days to Complete: Adjusted Contract Days to Complete: Adjusted Substantial Completion Date: 11/8/2022 Contractor's Signature: ___________________________________________________________Date: ________________ Approval Recommended by Design Consultant: ___________________________________________________________Date: ________________ Owner's Representative Approval: ___________________________________________________Date: ________________ cc: PRIME CONTRACT CHANGE ORDER PROPOSAL WORKSHEET WB Brawley The Contractor agrees to perform the work outlined in this change proposal for the amount specified above and in accordance with the Contract documents if the work is authorized by the Owner. RFI#5 substitution of electrified strikes and related hardware to match existing conditions. Material credit only; shop and field labor credit to be issued as a component of a labor and material credit for re-purposing matching and existing doors, frames and hardware already on site and in good condition. 21-094 04 2022108 Leah Filomena, HH Architecture West Campus 3rd Floor Office Upfit DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Change Order 352951 -Orange County West Campus Office 3rd Floor Upfit Contemplated Change Order #1 Secure rooms changed to storeroom lock with electric strike Aug 25,2022 2:02 PM Page 1 of 1 -1 Single Door #327 CORRIDOR 324 to SECURE 327 90°LH 1 Single Door #327 CORRIDOR 324 to SECURE 327 90°LH 1 Hinges 5BB1 4 1/2 x 4 1/2 652 IV -1 Hinges 5BB1 4 1/2 x 4 1/2 TW8 652 IV -1 Electrified Lockset ML20906 LWA L4 M92 SEC LH 630 CR 1 Lock Set CL3157 NZD 626 CR 1 Electric Strike Body 8000-LBM 630 HS -1 Single Door #338A CORRIDOR 336 to HR SECURE 338 110°LH 1 Single Door #338A CORRIDOR 336 to HR SECURE 338 110°LH 1 Hinges 5BB1 4 1/2 x 4 1/2 652 IV -1 Hinges 5BB1 4 1/2 x 4 1/2 TW8 652 IV -1 Electrified Lockset ML20906 LWA L4 M92 SEC LH 630 CR 1 Lock Set CL3157 NZD 626 CR 1 Electric Strike Body 8000-LBM 630 HS -1 Single Door #338B WORK 346 to HR SECURE 338 110°LH 1 Single Door #338B WORK 346 to HR SECURE 338 110°LH 1 Hinges 5BB1 4 1/2 x 4 1/2 652 IV -1 Hinges 5BB1 4 1/2 x 4 1/2 TW8 652 IV -1 Electrified Lockset ML20906 LWA L4 M92 SEC LH 630 CR 1 Lock Set CL3157 NZD 626 CR 1 Electric Strike Body 8000-LBM 630 HS Section Totals 08 71 11 Finish Hardware (816.12) Pre-Tax Total:(816.12) Taxes 10202 NC-NORTH CAROLINA STATE TAX 4.75%19.11 11199 NC-Orange Co (+Transit)9.06 11395 NC-Orange Co Transit .5 (eff 4/1/13)2.01 Tax Total:30.18 Grand Total:(785.94) Credit for field work to be determined when scope finalization Deduct for Mortise lock prep per door = $50.00 Deduct for raceway prep per door = $75.00 Pick up and delivery charges also negated due to existing material reuse without shop work. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B CL3100 Series Cylindrical Locks Product Catalog DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Overview CL3100 Series Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. CL3100.2 45237 05/22 Table of Contents Overview .................................2 Features ...................................3 Functions .................................5 Trim Designs ............................7 Options and Accessories ..........8 How to Order ........................11 Quick Codes ..........................12 How to Specify ..................... 14 www.corbinrusswin.com Quality The CL3100 series is a Grade 1 lever lockset manufactured with the highest quality materials to ensure strength, durability and quiet operation. Available in all standard architectural finishes, the CL3100 series subtly complements any high-use commercial, industrial and institutional application. T-Zone Construction Direct linkage with fixed alignment between the hub and the latchbolt is the best construction for quietly and effectively operating the latchbolt. For this reason, Corbin Russwin interlocks the aligning and latch tubes, which form a rugged torque resistant “T” in the critical twist area. This “T-Zone” construction, combined with long lasting components, makes T-Zone Lever locks outstanding! Vandal Resistance The Corbin Russwin CL3100 Series* follows a higher standard for Grade 1 bored locks. The unique T-Zone construction provides strength and durability by true interlocking between the lockbody and the latch far exceeding the ANSI/BHMA A156.2 Series 4000 Grade 1 standards. Applications • High traffic areas • Offices • Public buildings • Hospitals • Institutions • Educational facilities – K-12 and Universities • Retail Key Advantages • UL Cycle above and beyond test completed at 7.6 Million Cycles. Verification ID: V875753 • Several security key systems available (Access 3®, Pyramid, etc.) • Fits most standard door preps • Only 45 degrees of lever rotation required to retract latchbolt • 18 functions. Many of which are easily field changeable • 3 levers and 4 roses available to cover a wide variety of door preps and design requirements • Simple cylinder removal. Easy change outs. • T-Zone construction tested to over 15 million cycles, exceeding ANSI/BHMA Grade 1 standards by 15 times. *Patented design and construction ASSA ABLOY Group companies offer MicroShield®, an anti- microbial coating for door hardware. MicroShield uses proven silver ion-based technology from Agion®, a leading provider of antimicrobial solutions, to stem the spread of bacteria and other microbes. MicroShield® is a registered trademark of ASSA ABLOY Access and Egress Hardware Group, Inc. The Agion antimicrobial is not intended as a substitute for good hygiene. Coated products must still be cleaned to ensure the surfaces will be free of destructive microbes. ASSA ABLOY makes no representations or warranties, express or impled, as to the efficacy of the Agion antimicrobial. A copy of the Agion warranty is available upon request. Agion is a registered trademark of Agion Technologies, Inc., Wakefield, MA, USA. ® DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. CL3100.345237 05/22 Features CL3100 Series Features Handing Non-handed Door Thickness 1-3/4" (44mm) - 2" (51mm) standard. Optional: Over 2" (51mm) - 2-1/4" (57mm); see Quick Codes, page 13. Door Prep ANSI/BHMA A156.115 (161) Lock Chassis Steel, zinc dichromated for corrosion resistance. Backset 2-3/4" (70mm) standard. Optional: 3-3/4" (95mm) and 5" (127mm); see Quick Codes, page 13. Bearing Assembly Cast and machined stainless steel Latchbolt Stainless steel bolt 7/8" (22mm) diameter x 1/2" (13mm) throw. Optional: 3/4" (19mm) throw fire latch. Front Wrought brass or stainless steel, 2-1/4" (57mm) x 1-1/8" (29mm). Accommodates flat front doors and doors beveled 1/8" (3mm) in 2" (51mm). Strike Wrought brass or stainless steel ANSI curved lip standard, 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center. Optional: strikes, lip lengths and ANSI wrought strike box available. See Quick Codes, page 13. Levers Secured with 6 lobe security set screw standard Roses Brass Cylinder Brass, 6-pin L4 keyway, 0-bitted standard. Keying Features Available Master keying Construction master keying Visual key control Concealed key control Interchangeable core (LFIC or SFIC) Security Security LFIC Access 3® LFIC Pyramid Pyramid LFIC Keys Two nickel silver standard. Warranty Ten-year limited. Classroom Security The CL3152 Classroom Intruder function is the solution to classroom security: a double cylinder lockset that allows locking of the outside lever from either side. Egress is always possible with the standard anti-panic feature, whether the door is locked or not. STC55 Sound Transmission Class Rated Product (M112) Corbin Russwin CL3100 Series Lever Locks are part of the STC Acoustical Door Systems from ASSA ABLOY Group brand Security Metal Products (SMP). This solution encompasses door, frame, sounds seals and threshold, and lock. The STC55 requires a special version of the CL3100 Lever Lock. To order the CL3100 Series Lever Lock for use with STC55 door system, include the M112 quick code in the order string and specify the C or K rose only. With this prefix, it will be configured for a 1-3/4" door with a 3/4" panel for 2-1/2" total thickness. Door handing is required to dictate panel location. Functions are limited to the following: CL3110, CL3151, CL3155, CL3157, CL3172 and CL3180. To learn more about SMP and the STC 55 Acoustical Door System, please visit www.secmet.com Certification/Compliance ANSI/BHMA Exceeds A156.2 Series 4000, Grade 1. Meets A117.1 Accessibility Code. California State Reference Code (Formerly Title 19, California State Fire Marshal Standard) All levers with returns comply; levers return to within 1/2" (13mm) of door face. UL-cUL UL and cUL listed to Canadian Safety Standards Listed for 3 Hour Doors All locks with 1/2" (13mm) throw latchbolt listed for A label and lesser class 4' x 10' single doors. All locks with 3/4" (19mm) throw latchbolt listed for A label and lesser class 8' x 10' pairs of doors. Letter F and UL symbol on latch front indicate listing. Any retrofit or other field modification to a fire-rated opening can potentially impact the fire-rating of the opening, and Corbin Russwin, Inc. makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire- rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings. A.D.A. All levers conform to ADA requirements for barrier-free accessibility. Windstorm UL Listed: ANSI/SDI-BHMA A250.13;ANSI/ ASTM E330-2002 ANSI/ASTM 31886-2005 & ASTM 31996- 1009 UL Certification Directory ZHEM.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1 DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. CL3100.4 45237 05/22 Features CL3100 Series Finishes ANSI/BHMA 605 (US3)Bright Brass ANSI/BHMA 606 (US4)Satin Brass ANSI/BHMA 611 (US9)Bright Bronze ANSI/BHMA 612 (US10)Satin Bronze ANSI/BHMA 613 (US10B)Dark Oxidized Satin Bronze, Oil Rubbed 613E Dark Oxidized Satin Bronze - equivalent 613L Dark Oxidized Satin Bronze, Clear Coated ANSI/BHMA 618 (US14)Bright Nickel Plated ANSI/BHMA 619 (US15)Satin Nickel Plated 619C Satin Nickel Plated with Microshield® ANSI/BHMA 625 (US26)Bright Chromium Plated ANSI/BHMA 626 (US26D)Satin Chromium Plated 626C Satin Chromium Plated with MicroShield® ANSI/BHMA 722 (US10A)Black Oxidized Bronze, Oil Rubbed BSP Black Suede Powder Coat WSP White Suede Powder Coat Zinc levers are plated to match ANSI/BHMA finish. 4 Cast and Stainless Steel Bearing Assembly 3 Solid Cast Lever Designs Available 6 Lobe Security Set Screw Stainless Steel 1/2" (13mm) Throw Latch 4 Rose Styles Available 3 Solid Cast Lever Designs Available MicroShield® CL3100 series locks are available with MicroShield® antimicrobial coating. MicroShield is a revolutionary hardware finish coating, using a silver ion based technology, which inhibits the growth of bacteria, algae, yeast, fungus, mold and mildew. MicroShield is non- toxic and lasts for the lifetime of the finish to which it is applied. To order, suffix option code “C”. Note: MicroShield® coating may vary finish color from architectural standards. MicroShield is not intended as a substitute for traditional infection control programs such as hand hygiene or use of disinfectants. Coated product must still be cleaned to insure the surfaces will be free of destructive microbes. Corbin Russwin makes no representations or warranties, express or implied, as to the efficacy of the MicroShield antimicrobial. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. CL3100.545237 05/22 Functions CL3100 Series Indicates optional interchangeable core available; see Quick Codes, page 12. Outside Inside Series/ Function Type ANSI No.Function Description CL3110 Passage or Closet F75 • Latchbolt by lever either side. • Both levers always free. CL3120 Privacy, Bedroom or Bathroom F76A • Throw-off latchbolt by lever. • Outside lever locked by push button on inside lever. • Outside lever unlocked by emergency release tool outside, by rotating inside lever or by closing door. • Inside lever always free. CL3120H Hospital Privacy — • Outside lever locked by push button on inside lever. • Outside lever unlocked by rotating thumbturn on outside lever and releasing inside push button. • Rotating inside lever or closing door also unlocks outside lever. CL3129 Hotel or Motel F93 • Deadlocking latchbolt by lever inside or by key outside. • Push button shuts out all keys except emergency key, and projects occupancy indicator in face of cylinder. • Push button released by turning inside lever. • Outside lever always locked. • Inside lever always free. • Not available with other manufacturers keyways • Pushbutton will not depress unless door is in closed position • Lockout key fixes pushbutton in locked position, shutting out all keys except emergency key. • Lockout key ordered separately. CL3132 Institutional or Utility F87 • Deadlocking latchbolt by key either side. • Should be used only in office or room with multiple entries. CL3140NT Exit Latch F89 • Deadlocking latchbolt by lever inside. • Outside lever always locked. • Inside lever always free. CL3150 Half Dummy Trim —• Lever acts as pull only; no operation. • Lever is rigid. CL3151 Entrance or Office F81 • Deadlocking latchbolt by lever either side, except when turn button locks outside. • Turning button locks outside lever, requiring key at all times. • Turning inside lever does not unlock outside lever until button is manually turned to unlocked position. • Inside lever always free. CL3152 Classroom Intruder — • Deadlocking latchbolt by inside lever or outside lever except when key inside or outside locks outside lever. • Key in either lever locks or unlocks the outside lever except when inside locks the outside lever - then only the inside key can unlock the outside lever. The outside key only retracts the latchbolt unless the outside lever is unlocked by the inside key. • Inside lever always free. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. CL3100.6 45237 05/22 Functions CL3100 Series Indicates optional interchangeable core available; see Quick Codes, page 12. Outside Inside Series/ Function Type ANSI No.Function Description CL3155 Classroom F84 • Deadlocking latchbolt by lever either side, except when key outside locks outside lever. • Outside lever locked or unlocked by key outside. • Inside lever always free. CL3157 Storeroom or Closet F86 • Deadlocking latchbolt by key in outside lever or by rotating inside lever. • Inside lever always free. • Outside lever rigid at all times. CL3161 Entry or Office F82A • Deadlocking latchbolt by lever either side, except when push button locks outside lever. • Push button released by turning inside lever or by key in outside lever. • Closing door does not release push button. • Inside lever always free. CL3162 Communicating F80 • Deadlocking latchbolt by lever either side, except when key in either lever locks and unlocks the lever independently of the other. • Keyed alike unless otherwise specified. • Should be used only in office or room with multiple entries. CL3170 Full Dummy Trim —• Levers act as pulls only; no operation. • Levers are rigid. CL3172 Apartment, Exit or Public Toilet F88 • Deadlocking latchbolt by lever either side, except when key inside locks outside lever. • Key outside retracts latchbolt when outside lever is locked by key inside. • Key inside unlocks outside lever. • Inside lever always free. • Keyed alike unless otherwise specified. CL3175 Corridor/ Dormitory Lock F90 • Latchbolt by lever either side except when pushbutton or key locks outside lever. • Pushbutton will not depress unless door is in closed position. • Depressed pushbutton indicates door is locked. Rotating inside lever releases button. • Inside lever always free. • Outside lever rigid when locked. CL3180 Passage Lever x Blank Plate F111 • Deadlocking latchbolt by lever. • Lever on one side; blank plate on other side. • Lever always free. • For single or double communicating doors. CL3193 Service Station F92 • Deadlocking latchbolt by lever. • Outside lever locked by push button. • Key retracts latchbolt when outside lever is locked. • Pushbutton will not depress unless door is in closed position • Push button released by turning inside lever or by key in outside lever, unless pushbutton is fixed in locked position by turning coin slot in inside lever. • Inside lever always free. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. CL3100.745237 05/22 Trim Designs CL3100 Series 2-7/8" (73mm) 5" (127mm) 3-1/2" (89mm) 2-7/8" (73mm) 4" (102mm) 3-1/2" (89mm) Newport Complies with codes requiring lever to return to within 1/2" (13mm) of door face. NZD, NZC, NZE, or NZK Lever: Solid cast zinc Rose: Brass Roses D Rose (standard) 3-1/2" Dia. Brass C Rose 2-3/4" Dia. Brass E Rose 3-1/8" Sq. Brass K Rose 2-3/4" Dia. Brass 4-1/2" (115mm) 3-1/2" (89mm) 2-7/8" (73mm) NZD Levers Armstrong AZD, AZC, AZE, or AZK Lever: Solid cast zinc Rose: Brass AZD Princeton Complies with codes requiring lever to return to within 1/2" (13mm) of door face. PZD, PZC, PZE, or PZK Lever: Solid cast zinc Rose: Brass PZD AZD shown NZD shown PZD shown DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. CL3100.8 45237 05/22 8 Options & Accessories CL3100 Series Latches To order optional latch with lockset, see Quick Codes, page 13. To order latch separately, specify Part No. x Finish (e.g., 780F81 x 626). Plug diameter for standard cylinders is .509, .510 for Access 3®, .552 for security cylinders and .496 for Pyramid cylinders. Cylinders are brass and come with 2 nickel silver keys. Finishes for all cylinders and cores include 606, 626 or BSP. To order cylinders separately, specify Part No. x Keyway x Finish (e.g., CR2000-031 x L4 x 626). Corbin Russwin Cylinders Part Code Functions Standard 2-3/4" (70mm) Backset 780F81 A 10 780F82 B 32, 40NT, 51, 52, 55, 57, 62, 72, 80 780F83 C 20, 20H 780F84 D 29, 75, 93 780F85 K 61 B334 option 3-3/4" (95mm) Backset 780F86 A 10 780F87 B 32, 40NT, 51, 52, 55, 57, 62, 72, 80 780F88 C 20, 20H 780F89 D 29, 75, 93 780F90 K 61 B500 option 5" (127mm) Backset 780F91 A 10 780F92 B 32, 40NT, 51, 52, 55, 57, 62, 72, 80 780F93 C 20, 20H 780F94 D 29, 75, 93 780F95 K 61 M16 option 3/4" (19mm) Throw* 780F96 —10, 51, 55, 57, 72, 80 Note: Code letter stamped on inside corner of latch front identifies function(s) compatible with latch assembly. *Limited to 2-3/4" Backset only Security Type Pins Standard Cylinder Large Format Interchangeable Core Conventional 6-Pin CR2000-031 (standard)CR8000 7-Pin CR2000-031-7 CR8000 -7 Hotel 6-Pin CR2001-031 CR8001-031 7-Pin CR2001-031-7 CR8001-031-7 Security 6-Pin CR2010-031 CR8010 Pyramid - High Security 7-Pin CR2020-031 CR8020 Pyramid - Security 7-Pin CR2027-031 CR8027 Access 3 - Patented (AP)6-Pin CR2500-031 CR8500 Access 3 - Security (AS)6-Pin CR2600-031 CR8600 Access 3 - High Security (AHS)6-Pin CR2700-031 CR8700 Access 3 - AP (Hotel Function)6-Pin CR2501-031 N/A Access 3 - AS (Hotel Function)6-Pin CR2601-031 N/A Access 3 - AHS (Hotel Function)6-Pin CR2701-031 N/A DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. CL3100.945237 05/22 Options & Accessories CL3100 Series Cylinders with Keyways From Other Manufacturers* Levers That Accept Cylinders/Cores From Other Manufacturers1 *All cylinders are 6-pin and available in 606 or 626 finish. Competitive Keyway Number Schlage® C (0-bitted)CR2400-031-C Schlage® C (keyed random)CR2400-031-C-KR SARGENT® LA (0-bitted) CR2400-031-LA Cylinder Type Quick Code Ordered with Lock Available Levers Tailpiece Kit (provided with lock)Competitor Cylinder Compatibility Fixed Core SARGENT 6-pin M09 AZ, NZ, PZ 775F948 — Schlage® 6-pin M06 AZ, NZ, PZ 778F788 Schlage® Conventional 21-002, 23-001, 23-013 or Primus® 20-548, 20-550, 20-748, 20-750 cylinders Yale® 6-pin YC NZ, PZ 778F759 (spacer)Yale® 1803-54L, 5803-54L and K403-54L cylinders only. Yale® 7-pin YC7 NZ, PZ Yale® 1803A-54L, 5803A-54L and K403A- 54L cylinders only. Interchangeable Core SFIC 6- or 7-pin M082 AZ, NZ, PZ 780F658 All 6- or 7-pin small format interchangeable cores Schlage® LFIC 6-pin M69 AZ, NZ, PZ 780F662 All Schlage® 6-pin large format interchangeable cores Yale® LFIC 6-pin YRC NZ, PZ 774F878 All Yale® 6-pin large format interchangeable cores Yale® LFIC 7-pin YRC7 NZ, PZ 774F888 All Yale® 7-pin large format interchangeable cores 1. Cylinder/core not included. 2. Ships with disposable core installed. Small Format Interchangeable Core Description Number 6-pin CR8200 7-pin CR8200-7 Cores are available in Best® keyways A, B, C, D, E, F, G, H, J, K, L, M. Cores are brass and come with 2 nickel silver keys. Finishes: 606, 626 DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. CL3100.10 45237 05/22 Options & Accessories CL3100 Series Strikes ANSI Curved Lip (standard) Brass or stainless steel. 4-7/8" (124mm) x 1-1/4" (32mm) x 1-1/4" (32mm) lip to center. Optional lip lengths: 1" (25mm), 1-1/8" (29mm), 1-3/8" (35mm), 1-1/2" (38mm), 1-3/4" (44mm), 2" (51mm), 2-1/4" (57mm), 2-1/2" (64mm), 2-3/4" (70mm), 3" (76mm). To order separately, specify 217L13 x Lip Length x Finish. Curved Lip "T" Strike (option) Brass. 2-3/4" (70mm) x 1-1/8" (29mm) x 1-1/4" (32mm) lip to center Optional lip lengths: 1" (25mm), 1-1/8" (29mm), 1-3/8" (35mm), 1-1/2" (38mm), 1-3/4" (44mm), 2" (51mm), 2-1/4" (57mm), 2-1/2" (64mm), 2-3/4" (70mm), 3" (76mm) To order optional strike with lockset, see Quick Codes, page 12. To order separately, specify 586L19 x Lip Length x Finish. ANSI Wrought Strike Box To order with lockset, see Quick Codes, page 13. To order separately, specify 120F768. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. CL3100.1145237 05/22 How to Order CL3100 Series Split Trim/Finish Order Stock Order Contract/Detailed Order Ordering Examples Where to find ordering information and quick codes Series/Function Pages 5-6 Trim Designs Page 7 Latches Page 8 Finish Page 12 Cylinders and Keying Page 12 Door Thickness Page 13 Backset Page 13 Strike Page 13 Miscellaneous Options Page 13 Quantity Series/Function Trim Finish Hand 100 CL3155 NZD 626 RHR Quantity Series/ Function Trim Finish HandOutsideInsideOutsideInside 12 CL3155 NZD NZD 626 625 LH Quantity Series/ Function Trim Finish Hand Door Thickness Backset Optional Strike Misc. Options Optional Cylinder Keying Keyset 24 CL3155 NZE 626 RHR D214 B334 SC114 M04-M16 C6 VKC3 AA1 DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. CL3100.12 45237 05/22 Quick Codes CL3100 Series Finishes Description Specify ANSI/BHMA 605 (US3)Bright Brass 605 ANSI/BHMA 606 (US4)Satin Brass 606 ANSI/BHMA 611 (US9)Bright Bronze 611 ANSI/BHMA 612 (US10)Satin Bronze 612 ANSI/BHMA 613 (US10B)Dark Oxidized Satin Bronze, Oil Rubbed 613 613E Dark Oxidized Satin Bronze - equivalent 613E 613L Dark Oxidized Satin Bronze, Clear Coated 613L ANSI/BHMA 618 (US14)Bright Nickel Plated 618 ANSI/BHMA 619 (US15)Satin Nickel Plated 619 619C Satin Nickel Plated with Microshield®619C ANSI/BHMA 625 (US26)Bright Chromium Plated 625 ANSI/BHMA 626 (US26D)Satin Chromium Plated 626 626C Satin Chromium Plated with MicroShield®626C ANSI/BHMA 722 (US10A)Black Oxidized Bronze, Oil Rubbed 722 BSP Black Suede Powder Coat BSP WSP White Suede Powder Coat WSP Zinc levers are plated to match ANSI/BHMA finish. Lock/Cylinder Finish Lock Cylinder/Core* 605,606,611,612,613,613E,613L,722 606 618,619,625,626,WSP 626 BSP BSP *Finish when cylinder provided with lock Cylinder and Keying Description Specify Conventional 6-pin (standard) Conventional 7-pin 7P Less Cylinder(s)1 LC LFIC LFIC 6-pin C6 LFIC 6-pin Less Core1 CL6 LFIC 6-pin Disposable Core1 CT6D LFIC 6-pin with Temporary Construction Core (Red)1 CT6R LFIC 6-pin with Temporary Construction Core (Blue)1 CT6B LFIC 6-pin with Temporary Construction Core (Green)1 CT6G LFIC 7-pin C7 LFIC 7-pin Less Core1 CL7 LFIC 7-pin Disposable Core1 CT7D LFIC 7-pin with Temporary Construction Core (Red)1 CT7R LFIC 7-pin with Temporary Construction Core (Blue)1 CT7B LFIC 7-pin with Temporary Construction Core (Green)1 CT7G SFIC1 SFIC 6-pin C6S SFIC 6- or 7-pin Small Format Disposable Core CTSD SFIC 6-pin with Temporary Construction Core (Blue)CT6SB SFIC 7-pin C7S SFIC 7-pin with Temporary Construction Core (Blue)CT7SB Security Security1 HS Security LFIC1 CHS Access 3® Access 3® Patented Fixed Core AP Access 3® Security Fixed Core AS Access 3® High Security Fixed Core AHS Access 3® Patented LFIC1 ACP Access 3® Security LFIC1 ACS Access 3® High Security LFIC1 ACHS Pyramid Pyramid Security Fixed Core1 PS Pyramid High Security Fixed Core1 PHS Pyramid Security LFIC1 PCS Pyramid High Security LFIC1 PCHS Pyramid LFIC Less Core1 CLP Pyramid with Temporary Construction Core1 CTP Pyramid Disposable Core1 CTPD Keying and Keys 0-bitted with 2 blank keys (standard) Keyed Random KR Construction Master Keyed CMK 2 keys per lock (standard) More than 2 keys KY# (e.g., KY6) 1. Not available in CL3129 function Description Specify Visual key control (VKC) No bitting or keyset stamping on keys VKC0 Keys only VKC1 Cylinders and keys (not for AS, AHS, ACS, ACHS, HS, CHS, PHS or PCHS)VKC2 Cylinders only (not for AS, AHS, ACS, ACHS, HS, CHS, PHS or PCHS)VKC3 Concealed key control (CKC) CKC cylinders with VKC keys CKC2 CKC cylinders only (not for AS, AHS, ACS, ACHS, PHS, PCHS)CKC3 Schlage® C keyway cylinder (0-Bitted or KR)1 C SARGENT® LA keyway cylinder (0-Bitted)1 LA Cylinder and Keying (cont.) DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. CL3100.1345237 05/22 Quick Codes CL3100 Series Strikes ANSI Lip to Center ANSI Curved Lip Specify T-Strike Curved Lip Box Specify 1" (25mm)SA100 SC100 1-1/8" (29mm)SA118 SC118 1-1/4" (32mm) SA114 (standard)SC114 1-3/8" (35mm) SA138 SC138 1-1/2" (38mm) SA112 SC112 1-3/4" (44mm) SA134 SC134 2" (51mm)SA200 SC200 2-1/4" (57mm)SA214 SC214 2-1/2" (64mm)SA212 SC212 2-3/4" (70mm)SA234 SC234 3" (76mm)SA300 SC300 Miscellaneous Options Description Specify Spanner head screws M02 Torx® head screws M04 Less cylinder, with tailpiece for Schlage® fixed core cylinder (AZ, NZ & PZ designs)M061 Lever to accept 6 or 7-pin SFIC (AZ, NZ & PZ designs)M081 Lever to accept SARGENT® fixed core cylinder (AZ, NZ & PZ designs)M091 3/4" (19mm) throw fire latch M16 ANSI wrought strike box M17 Knurling outside and inside M202 Knurling outside only M212 Knurling inside only M222 Abrasive coat outside and inside M23 Abrasive coat inside only M24 Abrasive coat outside only M25 Lead lining (roses)M28 Lever to accept Schlage® LFIC (AZ, NZ & PZ designs)M691 Security Lever M111 STC 55 Door Kit M112 Lever to accept Yale® 6-pin fixed core cylinder (NZ & PZ designs only) YC1 Lever to accept Yale® 7-pin fixed core cylinder (NZ & PZ designs only) YC71 Lever to accept Yale® 6-pin LFIC (NZ & PZ designs only) YRC1 Lever to accept Yale® 7-pin LFIC (NZ & PZ designs only) YRC71 1 Not available in CL3129 functions 2 All levers provided in a powder coat finish will be supplied with an abrasive coating Door Thickness Door Thickness Specify 1-3/4"(44mm) - 2" (51mm)(standard) Over 2" (51mm) - up to 2 1/4" (57mm) D214 Backset Description Specify 2-3/4" (70mm)(standard) 3-3/4" (95mm)B334 5" (127mm)B500 DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. CL3100.14 45237 05/22 How To Specify CL3100 Series All locksets shall be CL3100 Series Vandal Resistant Lever Locksets as manufactured by Corbin Russwin Architectural Hardware. A single lock chassis shall accommodate 1-3/4" (44mm) to 2-1/4" (57mm) door thickness. Locksets shall be non-handed. Locksets shall be able to withstand 3000 inch pounds of torque applied to the locked lever without gaining access. Locksets shall have solid cast levers without plastic fillers. Outside lever handles shall be a minimum of 4-5/8" (117mm) in length and shall provide a minimum of 2" (51mm) clearance from the surface of the door to the inside of the lever at the midpoint. Outside lever handles may return to within 1/2" (13mm) of the door surface. Levers on keyed locksets shall be removable only when the designated key is in the cylinder. Locksets shall be able to fit a standard 2-1/8" (55mm) bore without the use of thru-bolts. Standard rose size shall be 3-1/2" (89mm) in diameter. Latchbolt head shall be one piece stainless steel. Latchbolt assembly shall be encased within the lock body. Lockset shall have 2-3/4" (70mm) backset, standard. A single lockset shall accommodate a 6 or 7-pin conventional cylinder and all levers of master keying, construction master keying, visual key control, security, high security and interchangeable core. Cylinders may be easily changed by removing the lever without disassembling the lockset. Locksets required for fire doors shall be listed by UL for ratings of A label (3 hours) and less, for doors up to 4'0" (1.2m) x 10'0" (3m) and pairs of doors 8'0" (2.4m) x 10'0" (3m). A 3/4" (19mm) throw Latchbolt for pairs of fire doors shall be standard. Locksets shall be cycle tested per ANSI/BHMA A156.2, to eight (8) million cycles without any visible lever sag. Certification: Exceeds ANSI/BHMA A156.2 Series 4000, Grade 1 UL and cUL listed to Canadian safety standards UL-cUL listed for 3 Hour doors All levers conform to ADA requirements for barrier free accessibility Meets UL 10C and UBC 7-2 UL Listed: ANSI/SDI-BHMA A250.13;ANSI/ASTM E330-2002 ANSI/ASTM 31886-2005 & ASTM 31996-1009 UL Certification Directory ZHEM.R21744 Latching Hardware Listed on Florida Building Code Website: FL4351-R1 Meets ANSI A117.1 Accessibility Code. California State Reference Code (formerly Title 19, Cal. State Fire Marshal Standard). Lockset shall carry a ten (10) year limited warranty. CL3100 Series Suggested Specification DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. CL3100.1545237 05/22 Notes CL3100 Series DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B In U.S. Corbin Russwin 225 Episcopal Road Berlin, CT 06037 Phone: 800-543-3658 Fax: 800-447-6714 corbinrusswin.com In Canada ASSA ABLOY Door Security Solutions Canada 160 Four Valley Drive Vaughan, Ontario Canada L4K 4T9 Phone: 800-461-3007 Fax: 905-738-2478 www.assaabloy.ca Corbin Russwin is a brand associated with ASSA ABLOY Access and Egress Hardware Group, Inc., an ASSA ABLOY Group company. Copyright © 2012-2022, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited. Patent pending and/or patent www.assaabloydss.com/patents. ASSA ABLOY Group companies offer MicroShield®, an anti-microbial coating for door hardware. MicroShield uses proven silver ion-based technology from Agion®, a leading provider of antimicrobial solutions, to stem the spread of bacteria and other microbes. MicroShield® is a registered trademark of ASSA ABLOY Access and Egress Hardware Group, Inc. The Agion antimicrobial is not intended as a substitute for good hygiene. Coated products must still be cleaned to ensure the surfaces will be free of destructive microbes. ASSA ABLOY makes no representations or warranties, express or impled, as to the efficacy of the Agion antimicrobial. A copy of the Agion warranty is available upon request. Agion is a registered trademark of Agion Technologies, Inc., Wakefield, MA, USA. For additional information, contact your ASSA ABLOY Door Security Solutions sales consultant or visit www.corbinrusswin.com. 45237-05/22 ® DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B 38 Electric StrikesThe concealed electric strike solution for cylindrical locksets. The 8000 Series Electrical Strike is a compact, high performance electric strike featuring a unique concealed design for use with cylindrical locksets. No cutting on the frame is required. Simply remove the existing strike plate, adjust the vertical alignment feature to the latchbolt centerline and install. Its strength is derived from a unique keeper pin locking design, enabling the 8000 to exceed the ratings of the frame, door and locking hardware. This field selectable fail safe/fail secure unit is easy to install and accommodates latchbolts up to 5/8" throw. Features Standard Features • No cutting on frame required • Vertical adjustability to accommodate door sag and misalignment • Tamper resistant • Static strength 1,500 lbs • Dynamic strength 70 ft-lbs • Endurance 1 million cycles • Field selectable fail safe/fail secure • Non-handed • Internally mounted solenoid • Accommodates 1/2" – 5/8" [12.7mm – 15.9mm] cylindrical latchbolt (5/8" [15.9mm] with 1/8" [3.175mm] door gap) • Strike body depth 1-1/16" [27.3mm] • Strike body width 1-7/16" [36.5mm] • Plug-in Connector • SecuriCare five-year, no-fault, no questions asked warranty (Addition of SMART Pac® III extends the warranty to 10 years) Optional Features • LBM Latchbolt monitor Accessories • 2001M Plug-in bridge rectifier • 2004M ElectroLynx® adapter • 2005M3 SMART Pac® III • 2006M Plug-in buzzer 8000 Electric Strike Works with cylindrical locksets and accommodates latchbolts up to 5/8" throw Also available in a Complete One Box Solution DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Updated 4/27/22 Patent pending and/or patent www.assaabloydss.com/patents Copyright © 2022, Hanchett Entry Systems, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Hanchett Entry Systems, Inc. is prohibited. US hesinnovations.com | 800 626 7590 | customerservice.hes@assaabloy.com Canada assaabloydss.ca | 800 461 3007 | sales.dss.ca@assaabloy.com 39 Electric StrikesDimensionsSpecifications Certifications • ANSI/BHMA A156.31, Grade 1 • UL 1034 burglary-resistant listed and suitable for outdoor use • UL 294 listed • RoHS compliant Frame Application • Metal • Wood • Aluminum Electrical (DC Continuous Duty) • Dual voltage 12/24 VDC/VAC • 240 mA at 12 VDC/120 mA at 24 VDC • PoE friendly How to Order SERIES MODEL FINISH*OPTION (S) 8000 –– 630 – LBM 8000 Universal Electric Strike; faceplates ordered separately C* Complete Electric Strike; includes the 801 and 801A faceplates 605 Bright Brass (blank) No Monitor 606 Satin Brass LBM Latchbolt Monitor (blank) Strike Body Only 612 Satin Bronze 613 Bronze Toned 629 Bright Stainless Steel 630 Satin Stainless Steel BLK Black *Complete Pacs are only available in the 630 finish NOTE: Electric strike compatibility is determined at time of electric strike product release. ASSA ABLOY is not responsible for incompatibility of products that have changed in design or craftsmanship by their respective manufacturers. When compatibility is a concern, contact Customer Support for application assistance. 8000 Electric Strike Diagram shown with 801 Option 1-7/16" [36.5mm] 1-1/16" [27.3mm] 3-3/8" [85.5mm]4-1/8" [104.8mm] 4-7/8" [123.4mm] DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B 42 Electric Strikes8000/8300 Series Faceplate Options OPERATION After releasing the latchbolt, the keeper returns to the locked position. 4-7/8" × 1-1/4" [123.8mm x 31.75mm] Square corners 801 Option For use with: Cylindrical locksets in ANSI metal jambs, with latchbolts up to 5/8" [15.9mm] throw. ANSI/BHMA Numbers: E05031, E09321, E09322, E09323 4-7/8" × 1-1/4" [123.8mm x 31.75mm] Radius corners and flat faceplate 801A Option For use with: Cylindrical locksets with latchbolts up to 5/8" [15.9mm] throw. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA Numbers: E05031, E09321, E09322, E09323 4-7/8" × 1-1/4" [123.8mm x 31.75mm] 1/4" extended lip 801E Option For use with: Extended lip for ‘knock-down’ style frame installations. For use with cylindrical latchbolts up to 5/8" [15.9mm] throw. ANSI/BHMA Numbers: E05031, E09321, E09322, E09323 7-15/16" × 1-7/16" [201.6mm x 36.5mm] 802 Option For use with: Cylindrical locksets with latchbolts up to 5/8" [15.9mm] throw. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA Numbers: E05031, #E09321, E09322, E09323 6-7/8" × 1-1/4" Radius corners and flat faceplate 803 Option For use with: Cylindrical locksets with latchbolts up to 5/8" [15.9mm] throw. Includes universal mounting tabs. Aluminum frames. ANSI/BHMA Numbers: E05031, E09321, E09322, E09323 9" × 1-3/8" [123.8mm x 34.9mm] Radius corners and flat faceplate 805 Option For use with: Cylindrical locksets. Latchbolts up to 5/8" [15.9mm] throw. Four point mounting for wood installations. ANSI/BHMA Numbers: #E05031, #E09321, #E09322, #E09323 “For use with” information is offered as a recommendation only. Reference should be made to the lockset manufacturer for proper installation instructions necessary to meet compatibility requirements. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B From:Alan Dorman To:AMservice Subject:FW: WCOB 3rd Floor Upfit - CO#2 Date:Wednesday, September 21, 2022 5:58:48 AM Attachments:CO #2 - HHA Signed.pdf Kate, Please route this contract. Thanks, Alan Mobile: 919-619-8859 From: Leah Filomena <LFilomena@hh-arch.com> Sent: Tuesday, September 20, 2022 4:49 PM To: Alan Dorman <adorman@orangecountync.gov>; Allison Cooper <acooper@orangecountync.gov> Cc: Dave Carey <dcarey@hh-arch.com>; Nicholas Zastrow <nzastrow@hh-arch.com>; Jeff Thompson <JeffThompson@brawley.net>; Amanda Brooks <abrooks@brawley.net>; Steven Arndt <sarndt@orangecountync.gov> Subject: [EXTERNAL MAIL!] WCOB 3rd Floor Upfit - CO#2 Alan and Allison, Please find the attached CO for the 3rd floor renovation which incorporates the following PCOs: PCO#2 - Additional ACT system replacement due to unforeseen conditions. Stud cavity repair to accept new walls. $3040.02 PCO#3 - Drywall finishing point-up in existing offices prior to painting. $1413.72 PCO#4 - Material Credit for substitution of electrified strikes and related hardware to match existing conditions. ($841.74) The total additional cost is $3612.00 which I believe will require a PO before it can be added to the next payapp. Best, |||||||||||||||||||||||||||||| Leah Filomena Interior Designer, Project Captain lfilomena@hh-arch.com HH ARCHITECTURE www.hh-arch.com Main: 919 828-2301 | Direct: 984 272-4074 1100 Dresser Court, Raleigh, NC 27609 DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B INSR ADDL SUBR LTR INSR WVD DATE (MM/DD/YYYY) PRODUCER CONTACT NAME: FAXPHONE (A/C, No):(A/C, No, Ext): E-MAIL ADDRESS: INSURER A : INSURED INSURER B : INSURER C : INSURER D : INSURER E : INSURER F : POLICY NUMBER POLICY EFF POLICY EXPTYPE OF INSURANCE LIMITS(MM/DD/YYYY)(MM/DD/YYYY) COMMERCIAL GENERAL LIABILITY AUTOMOBILE LIABILITY UMBRELLA LIAB EXCESS LIAB WORKERS COMPENSATION AND EMPLOYERS' LIABILITY DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) AUTHORIZED REPRESENTATIVE INSURER(S) AFFORDING COVERAGE NAIC # Y / N N / A (Mandatory in NH) ANY PROPRIETOR/PARTNER/EXECUTIVE OFFICER/MEMBER EXCLUDED? EACH OCCURRENCE $ DAMAGE TO RENTED $PREMISES (Ea occurrence)CLAIMS-MADE OCCUR MED EXP (Any one person)$ PERSONAL & ADV INJURY $ GENERAL AGGREGATE $GEN'L AGGREGATE LIMIT APPLIES PER: PRODUCTS - COMP/OP AGG $ $ PRO- OTHER: LOCJECT COMBINED SINGLE LIMIT $(Ea accident) BODILY INJURY (Per person)$ANY AUTO OWNED SCHEDULED BODILY INJURY (Per accident)$AUTOS ONLY AUTOS AUTOS ONLY HIRED PROPERTY DAMAGE $AUTOS ONLY (Per accident) $ OCCUR EACH OCCURRENCE $ CLAIMS-MADE AGGREGATE $ DED RETENTION $$ PER OTH- STATUTE ER E.L. EACH ACCIDENT $ E.L. DISEASE - EA EMPLOYEE $ If yes, describe under E.L. DISEASE - POLICY LIMIT $DESCRIPTION OF OPERATIONS below POLICY NON-OWNED SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer any rights to the certificate holder in lieu of such endorsement(s). COVERAGES CERTIFICATE NUMBER:REVISION NUMBER: CERTIFICATE HOLDER CANCELLATION © 1988-2015 ACORD CORPORATION. All rights reserved. The ACORD name and logo are registered marks of ACORDACORD 25 (2016/03) ACORDTM CERTIFICATE OF LIABILITY INSURANCE The Cincinnati Insurance Company 5/31/2022 McGriff Insurance Services 1111 Military Cutoff Road #221 Wilmington, NC 28405 910 763-3431 910 763-3431 877-297-1096 WB Brawley Company 3314 Jaeckle Drive Suite 120 Wilmington, NC 28403 10677 A X X X PD Ded:1,000 X Y Y EPP0517147 01/01/2022 01/01/2023 1,000,000 500,000 10,000 1,000,000 2,000,000 2,000,000 A X X X Y Y EPP0517147 01/01/2022 01/01/2023 1,000,000 A X X X 0 Y Y EPP0517147 01/01/2022 01/01/2023 5,000,000 5,000,000 A N Y EWC0631994 01/01/2022 01/01/2023 X 1,000,000 1,000,000 1,000,000 A EQMT Leased/Rente EPP0517147 01/01/2022 01/01/2023 Limit - 75,000 Deductible - 1,000 Project: West Campus 3rd Floor Up-Fit Address: 131 Margaret Lane Suite 300, Hillsborough, NC, 27278 Orange County 300 West Tryon St. Hillsborough, NC 27278 1 of 1 #S30121049/M29892645 21WBBRA1Client#: 1745122 ABLAN 1 of 1 #S30121049/M29892645 DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B This page has been left blank intentionally. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 1 of 17 THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. CONTRACTORS'COMMERCIAL GENERAL LIABILITY BROADENED ENDORSEMENT This endorsement modifies insurance provided under the following: COMMERCIAL GENERAL LIABILITY COVERAGE PART A. Endorsement - Table of Contents: Coverage:Begins on Page: 1. Employee Benefit Liability Coverage .......................................................................................3 2. Unintentional Failure To Disclose Hazards .............................................................................9 3. Damage To Premises Rented To You ......................................................................................9 4. Supplementary Payments ......................................................................................................10 5. Medical Payments ...................................................................................................................10 6. 180 Day Coverage For Newly Formed Or Acquired Organizations ...................................10 7. Waiver Of Subrogation ...........................................................................................................11 8. Automatic Additional Insured - Specified Relationships: ..................................................11 • Managers Or Lessors Of Premises; • Lessor Of Leased Equipment; • Vendors; • State Or Governmental Agency Or Subdivision Or Political Subdivision - Permits Or Authorizations Relating To Premises; and • Mortgagee, Assignee Or Receiver 9. Property Damage To Borrowed Equipment .........................................................................14 10. Employees As Insureds - Specified Health Care Services And Good Samaritan Services ...................................................................................................................................15 11. Broadened Notice Of Occurrence .........................................................................................15 12. Nonowned Aircraft ..................................................................................................................15 13. Bodily Injury Redefined ..........................................................................................................15 14. Expected Or Intended Injury Redefined ...............................................................................15 15. Former Employees As Insureds ............................................................................................15 16. Voluntary Property Damage Coverage And Care, Custody Or Control Liability Coverage ..................................................................................................................................16 17. Broadened Contractual Liability - Work Within 50' Of Railroad Property .........................17 18. Alienated Premises .................................................................................................................17 B. Limits Of Insurance: The Commercial General Liability Limits of Insurance apply to the insurance provided by this endorse- ment, except as provided below: 1. Employee Benefit Liability Coverage Each Employee Limit: $1,000,000 Aggregate Limit: $3,000,000 Deductible Amount: $ 1,000 3. Damage To Premises Rented To You The lesser of: a.The Each Occurrence Limit shown in the Declarations; or b.$500,000 unless otherwise stated $ 4. Supplementary Payments a.Bail Bonds: $2,500 EPP0517147 WB Brawley CompanyDocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 2 of 17 b.Loss Of Earnings: $ 500 5. Medical Payments Medical Expense Limit: $ 10,000 9. Property Damage To Borrowed Equipment Each Occurrence Limit: $10,000 Deductible Amount: $ 250 16. Voluntary Property Damage Coverage (Coverage a.)And Care, Custody Or Control Liability Coverage (Coverage b.) Limits Of Insurance Coverage a. $1,000 Each Occurrence $5,000 Aggregate Coverage b.$5,000 Each Occurrence unless otherwise stated $ Deductible Amount (Each Occurrence) Coverage a.$250 Coverage b.$250 unless otherwise stated $ COVERAGE PREMIUM BASIS (a)Area (b)Payroll (c)Gross Sales (d)Units (e)Other RATE (For Limits in Excess of $5,000) ADVANCE PREMIUM (For Limits in Excess of $5,000) b.Care, Custody Or Control $ TOTAL ANNUAL PREMIUM $ DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 3 of 17 C. Coverages 1. Employee Benefit Liability Coverage a.The following is added to Section I - Coverages: Employee Benefit Liability Cover- age (1) Insuring Agreement (a)We will pay those sums that the insured becomes legally obligated to pay as damag- es caused by any act, error or omission of the insured, or of any other person for whose acts the insured is legally liable, to which this insurance applies. We will have the right and duty to defend the insured against any "suit" seeking those damages. However, we will have no duty to defend against any "suit" seeking damages to which this in- surance does not apply. We may, at our discretion, in- vestigate any report of an act, error or omission and settle any claim or "suit" that may result. But: 1)The amount we will pay for damages is limited as described in Section III - Limits Of Insur- ance; and 2)Our right and duty to defend ends when we have used up the appli- cable limit of insurance in the payment of judg- ments or settlements. No other obligation or liabil- ity to pay sums or perform acts or services is covered unless explicitly provided for under Supplementary Payments. (b)This insurance applies to damages only if the act, er- ror or omission, is negligent- ly committed in the "admin- istration" of your "employee benefit program"; and 1)Occurs during the policy period; or 2)Occurred prior to the "first effective date" of this endorsement pro- vided: a)You did not have knowledge of a claim or "suit" on or before the "first ef- fective date" of this endorsement. You will be deemed to have knowledge of a claim or "suit" when any "author- ized representa- tive"; i)Reports all, or any part, of the act, error or omission to us or any other insurer; ii)Receives a written or ver- bal demand or claim for dam- ages because of the act, er- ror or omis- sion; and b)There is no other applicable insur- ance. (2) Exclusions This insurance does not apply to: (a) Bodily Injury, Property Damage Or Personal And Advertising Injury "Bodily injury", "property damage" or "personal and advertising injury". (b) Dishonest, Fraudulent, Criminal Or Malicious Act Damages arising out of any intentional, dishonest, fraudulent, criminal or mali- cious act, error or omission, committed by any insured, including the willful or reck- less violation of any statute. (c) Failure To Perform A Con- tract Damages arising out of fail- ure of performance of con- tract by any insurer. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 4 of 17 (d) Insufficiency Of Funds Damages arising out of an insufficiency of funds to meet any obligations under any plan included in the "employee benefit program". (e) Inadequacy Of Perfor- mance Of Invest- ment/Advice Given With Respect To Participation Any claim based upon: 1)Failure of any invest- ment to perform; 2)Errors in providing in- formation on past per- formance of investment vehicles; or 3)Advice given to any person with respect to that person's decision to participate or not to par- ticipate in any plan in- cluded in the "employee benefit program". (f) Workers' Compensation And Similar Laws Any claim arising out of your failure to comply with the mandatory provisions of any workers' compensation, un- employment compensation insurance, social security or disability benefits law or any similar law. (g) ERISA Damages for which any in- sured is liable because of li- ability imposed on a fiduci- ary by the Employee Re- tirement Income Security Act of 1974, as now or hereafter amended, or by any similar federal, state or local laws. (h) Available Benefits Any claim for benefits to the extent that such benefits are available, with reasonable effort and cooperation of the insured, from the applicable funds accrued or other col- lectible insurance. (i) Taxes, Fines Or Penalties Taxes, fines or penalties, in- cluding those imposed un- der the Internal Revenue Code or any similar state or local law. (j) Employment-Related Prac- tices Any liability arising out of any: (1)Refusal to employ; (2)Termination of employ- ment; (3)Coercion, demotion, evaluation, reassign- ment, discipline, defa- mation, harassment, humiliation, discrimina- tion or other employ- ment - related practices, acts or omissions; or (4)Consequential liability as a result of (1), (2) or (3)above. This exclusion applies whether the insured may be held liable as an employer or in any other capacity and to any obligation to share damages with or repay someone else who must pay damages because of the in- jury. (3) Supplementary Payments Section I - Coverages, Sup- plementary Payments - Cover- ages A And B also apply to this Coverage. b. Who Is An Insured As respects Employee Benefit Lia- bility Coverage, Section II - Who Is An Insured is replaced by the follow- ing: (1)If you are designated in the Dec- larations as: (a)An individual, you and your spouse are insureds, but on- ly with respect to the con- duct of a business of which you are the sole owner. (b)A partnership or joint ven- ture, you are an insured. Your members, your part- DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 5 of 17 ners, and their spouses are also insureds but only with respect to the conduct of your business. (c)A limited liability company, you are an insured. Your members are also insureds, but only with respect to the conduct of your business. Your managers are in- sureds, but only with respect to their duties as your man- agers. (d)An organization other than a partnership, joint venture or limited liability company, you are an insured. Your "execu- tive officers" and directors are insureds, but only with respect to their duties as your officers or directors. Your stockholders are also insureds, but only with re- spect to their liability as stockholders. (e)A trust, you are an insured. Your trustees are also in- sureds, but only with respect to their duties as trustees. (2)Each of the following is also an insured: (a)Each of your "employees" who is or was authorized to administer your "employee benefit program"; (b)Any persons, organizations or "employees" having prop- er temporary authorization to administer your "employ- ee benefit program" if you die, but only until your legal representative is appointed; or (c)Your legal representative if you die, but only with re- spect to duties as such. That representative will have all your rights and duties under this Coverage Part. (3)Any organization you newly ac- quire or form, other than a part- nership, joint venture or limited liability company, and over which you maintain ownership or major- ity interest, will qualify as a Named Insured if no other similar insurance applies to that organi- zation. However, coverage under this provision: (a)Is afforded only until the 180th day after you acquire or form the organization or the end of the policy period, whichever is earlier; and (b)Does not apply to any act, error or omission that was committed before you ac- quired or formed the organi- zation. c. Limits Of Insurance As respects Employee Benefit Lia- bility Coverage, Section III - Limits Of Insurance is replaced by the fol- lowing: (1)The Limits of Insurance shown in Section B. Limits Of Insurance , 1. Employee Benefit Liability Coverage and the rules below fix the most we will pay regardless of the number of: (a)Insureds; (b)Claims made or "suits" brought; (c)Persons or organizations making claims or bringing "suits"; (d)Acts, errors or omissions; or (e)Benefits included in your "employee benefit program". (2)The Aggregate Limit shown in Section B. Limits Of Insurance , 1. Employee Benefit Liability Coverage of this endorsement is the most we will pay for all dam- ages because of acts, errors or omissions negligently committed in the "administration" of your "employee benefit program". (3)Subject to the limit described in (2)above, the Each Employee Limit shown in Section B. Limits Of Insurance, 1. Employee Benefit Liability Coverage of this endorsement is the most we will pay for all damages sus- tained by any one "employee", including damages sustained by such "employee's" dependents and beneficiaries, as a result of: (a)An act, error or omission; or DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 6 of 17 (b)A series of related acts, er- rors or omissions, regard- less of the amount of time that lapses between such acts, errors or omissions; negligently committed in the "administration" of your "employ- ee benefit program". However, the amount paid under this endorsement shall not ex- ceed, and will be subject to the limits and restrictions that apply to the payment of benefits in any plan included in the "employee benefit program." (4) Deductible Amount (a)Our obligation to pay dam- ages on behalf of the in- sured applies only to the amount of damages in ex- cess of the Deductible Amount stated in the Decla- rations as applicable to Each Employee. The limits of insurance shall not be re- duced by the amount of this deductible. (b)The Deductible Amount stated in the Declarations applies to all damages sus- tained by any one "employ- ee", including such "employ- ee's" dependents and bene- ficiaries, because of all acts, errors or omissions to which this insurance applies. (c)The terms of this insurance, including those with respect to: 1)Our right and duty to defend the insured against any "suits" seeking those damag- es; and 2)Your duties, and the du- ties of any other in- volved insured, in the event of an act, error or omission, or claim; apply irrespective of the ap- plication of the Deductible Amount. (d)We may pay any part or all of the Deductible Amount to effect settlement of any claim or "suit" and, upon no- tification of the action taken, you shall promptly reim- burse us for such part of the Deductible Amount as we have paid. d. Additional Conditions As respects Employee Benefit Lia- bility Coverage, Section IV - Com- mercial General Liability Condi- tions is amended as follows: (1)Item 2. Duties In The Event Of Occurrence, Offense, Claim Or Suit is replaced by the following: 2. Duties In The Event Of An Act, Error Or Omission, Or Claim Or Suit a.You must see to it that we are notified as soon as practicable of an act, error or omission which may result in a claim. To the extent possible, notice should include: (1)What the act, error or omission was and when it oc- curred; and (2)The names and addresses of any- one who may suf- fer damages as a result of the act, error or omission. b.If a claim is made or "suit" is brought against any insured, you must: (1)Immediately record the specifics of the claim or "suit" and the date received; and (2)Notify us as soon as practicable. You must see to it that we receive written no- tice of the claim or "suit" as soon as practicable. c.You and any other in- volved insured must: (1)Immediately send us copies of any demands, notices, summonses or le- gal papers re- DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 7 of 17 ceived in connec- tion with the claim or "suit"; (2)Authorize us to ob- tain records and other information; (3)Cooperate with us in the investigation or settlement of the claim or defense against the "suit"; and (4)Assist us, upon our request, in the en- forcement of any right against any person or organi- zation which may be liable to the in- sured because of an act, error or omission to which this insurance may also apply. d.No insured will, except at that insured's own cost, voluntarily make a payment, assume any obligation, or incur any expense without our consent. (2)Item 5. Other Insurance is re- placed by the following: 5. Other Insurance If other valid and collectible insurance is available to the insured for a loss we cover under this Coverage Part, our obligations are limited as follows: a. Primary Insurance This insurance is prima- ry except when c.below applies. If this insurance is primary, our obliga- tions are not affected unless any of the other insurance is also prima- ry. Then, we will share with all that other insur- ance by the method de- scribed in b.below. b. Method Of Sharing If all of the other insur- ance permits contribu- tion by equal shares, we will follow this meth- od also. Under this ap- proach each insurer contributes equal amounts until it has paid its applicable limit of insurance or none of the loss remains, whichever comes first. If any of the other in- surance does not permit contribution by equal shares, we will contrib- ute by limits. Under this method, each insurer's share is based on the ratio of its applicable limit of insurance to the total applicable limits of insurance of all insur- ers. c. No Coverage This insurance shall not cover any loss for which the insured is entitled to recovery under any other insurance in force previous to the effective date of this Coverage Part. e. Additional Definitions As respects Employee Benefit Lia- bility Coverage, Section V - Defini- tions is amended as follows: (1)The following definitions are added: 1."Administration" means: a.Providing information to "employees", including their dependents and beneficiaries, with re- spect to eligibility for or scope of "employee benefit programs"; b.Interpreting the "em- ployee benefit pro- grams"; c.Handling records in connection with the "employee benefit pro- grams"; or d.Effecting, continuing or terminating any "em- ployee's" participation in DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 8 of 17 any benefit included in the "employee benefit program". However, "administration" does not include: a.Handling payroll deduc- tions; or b.The failure to effect or maintain any insurance or adequate limits of coverage of insurance, including but not limited to unemployment insur- ance, social security benefits, workers' com- pensation and disability benefits. 2."Cafeteria plans" means plans authorized by applica- ble law to allow "employees" to elect to pay for certain benefits with pre-tax dollars. 3."Employee benefit pro- grams" means a program providing some of all of the following benefits to "em- ployees", whether provided through a "cafeteria plan" or otherwise: a.Group life insurance; group accident or health insurance; dental, vision and hearing plans; and flexible spending ac- counts; provided that no one other than an "em- ployee" may subscribe to such benefits and such benefits are made generally available to those "employees" who satisfy the plan's eligibil- ity requirements; b.Profit sharing plans, employee savings plans, employee stock ownership plans, pen- sion plans and stock subscription plans, pro- vided that no one other than an "employee" may subscribe to such benefits and such bene- fits are made generally available to all "employ- ees" who are eligible under the plan for such benefits; c.Unemployment insur- ance, social security benefits, workers' com- pensation and disability benefits; and d.Vacation plans, includ- ing buy and sell pro- grams; leave of ab- sence programs, includ- ing military, maternity, family, and civil leave; tuition assistance plans; transportation and health club subsidies. 4."First effective date" means the date upon which cover- age was first effected in a series of uninterrupted re- newals of insurance cover- age. (2)The following definitions are de- leted in their entirety and re- placed by the following: 8."Employee" means a person actively employed, formerly employed, on leave of ab- sence or disabled, or retired. "Employee" includes a "leased worker". "Employee" does not include a "tempo- rary worker". 21."Suit" means a civil proceed- ing in which money damag- es because of an act, error or omission to which this in- surance applies are alleged. "Suit" includes: a.An arbitration proceed- ing in which such dam- ages are claimed and to which the insured must submit or does submit with our consent; b.Any other alternative dispute resolution pro- ceeding in which such damages are claimed and to which the in- sured submits with our consent; or c.An appeal of a civil pro- ceeding. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 9 of 17 2. Unintentional Failure To Disclose Haz- ards Section IV - Commercial General Liabil- ity Conditions, 7. Representations is amended by the addition of the following: Based on our dependence upon your rep- resentations as to existing hazards, if un- intentionally you should fail to disclose all such hazards at the inception date of your policy, we will not reject coverage under this Coverage Part based solely on such failure. 3. Damage To Premises Rented To You a.The last Paragraph of 2. Exclusions under Section I - Coverage A - Bod- ily Injury And Property Damage Li- ability is replaced by the following: Exclusions c.through q.do not apply to "property damage" by fire, explo- sion, lightning, smoke or soot to premises while rented to you or tem- porarily occupied by you with permis- sion of the owner, for which the amount we will pay is limited to the Damage To Premises Rented To You Limit as described in Section III - Limits Of Insurance. b.The insurance provided under Sec- tion I - Coverage A - Bodily Injury And Property Damage Liability ap- plies to "property damage" arising out of water damage to premises that are both rented to and occupied by you. (1)As respects Water Damage Le- gal Liability, as provided in Para- graph 3.b.above: The exclusions under Section I - Coverage A - Bodily Injury And Property Damage Liability,2. Exclusions, other than i. War and the Nuclear Energy Liabil- ity Exclusion (Broad Form) , are deleted and the following are added: This insurance does not apply to: (a)"Property damage": (i)Assumed in any con- tract or agreement; or (ii)Caused by or resulting from any of the follow- ing: 1)Wear and tear; 2)Rust or other cor- rosion, decay, de- terioration, hidden or latent defect or any quality in property that caus- es it to damage or destroy itself; 3)Smog; 4)Mechanical break- down, including rupture or bursting caused by centrif- ugal force; 5)Settling, cracking, shrinking or ex- pansion; 6)Nesting or infesta- tion, or discharge or release of waste products or secre- tions, by insects, birds, rodents or other animals; or 7)Presence, growth, proliferation, spread or any ac- tivity of fungus, in- cluding mold or mildew, and any mycotoxins, spores, scents or byproducts pro- duced or released by fungi. (b)"Property damage" caused directly or indirectly by any of the following: (i)Earthquake, volcanic eruption, landslide or any other earth move- ment; (ii)Water that backs up or overflows or is other- wise discharged from a sewer, drain, sump, sump pump or related equipment; (iii)Water under the ground surface pressing on, or flowing or seeping through: 1)Foundations, walls, floors or paved surfaces; DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 10 of 17 2)Basements, whether paved or not; or 3)Doors, windows or other openings. (c)"Property damage" caused by or resulting from water that leaks or flows from plumbing, heating, air condi- tioning, fire protection sys- tems, or other equipment, caused by or resulting from freezing, unless: (i)You did your best to maintain heat in the building or structure; or (ii)You drained the equip- ment and shut off the water supply if the heat was not maintained. (d)"Property damage" to: (i)Plumbing, heating, air conditioning, fire protec- tion systems, or other equipment or applianc- es; or (ii)The interior of any building or structure, or to personal property in the building or structure, caused by or resulting from rain, snow, sleet or ice, whether driven by wind or not. c. Limit Of Insurance With respect to the insurance afford- ed in Paragraphs 3.a. and 3.b.above, the Damage To Premises Rented To You Limit as shown in the Decla- rations is amended as follows: (1)Paragraph 6. of Section III - Limits Of Insurance is replaced by the following: 6.Subject to Paragraph 5. above, the Damage To Premises Rented To You Limit is the most we will pay under Coverage A - Bodily Injury And Property Dam- age Liability for damages because of "property dam- age" to any one premises: a.While rented to you, or temporarily occupied by you with permission of the owner; b.In the case of damage by fire, explosion, light- ning, smoke or soot, while rented to you; or c.In the case of damage by water, while rented to and occupied by you. (2)The most we will pay is limited as described in Section B. Limits Of Insurance , 3. Damage To Premises Rented To You of this endorsement. 4. Supplementary Payments Under Section I - Supplementary Pay- ments - Coverages A And B: a.Paragraph 2.is replaced by the fol- lowing: Up to the limit shown in Section B. Limits Of Insurance , 4.a.Bail Bonds of this endorsement for cost of bail bonds required because of accidents or traffic law violations arising out of the use of any vehicle to which the Bodily Injury Liability Coverage ap- plies. We do not have to furnish these bonds. b.Paragraph 4.is replaced by the fol- lowing: All reasonable expenses incurred by the insured at our request to assist us in the investigation or defense of the claim or "suit", including actual loss of earnings up to the limit shown in Sec- tion B. Limits Of Insurance , 4.b. Loss Of Earnings of this endorsement per day because of time off from work. 5. Medical Payments The Medical Expense Limit of Any One Person as stated in the Declarations is amended to the limit shown in Section B. Limits Of Insurance, 5. Medical Pay- ments of this endorsement. 6. 180 Day Coverage For Newly Formed Or Acquired Organizations Section II - Who Is An Insured is amended as follows: Subparagraph a.of Paragraph 3.is re- placed by the following: a.Insurance under this provision is af- forded only until the 180th day after DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 11 of 17 you acquire or form the organization or the end of the policy period, whichever is earlier; 7. Waiver Of Subrogation Section IV - Commercial General Liabil- ity Conditions, 9. Transfer Of Rights Of Recovery Against Others To Us is amended by the addition of the following: We waive any right of recovery we may have against any person or organization against whom you have agreed to waive such right of recovery in a written contract or agreement because of payments we make for injury or damage arising out of your ongoing operations or "your work" done under a written contract or agree- ment with that person or organization and included in the "products-completed oper- ations hazard". However, our rights may only be waived prior to the "occurrence" giving rise to the injury or damage for which we make payment under this Cov- erage Part. The insured must do nothing after a loss to impair our rights. At our re- quest, the insured will bring "suit" or trans- fer those rights to us and help us enforce those rights. 8. Automatic Additional Insured - Speci- fied Relationships a.The following is added to Section II - Who Is An Insured: (1)Any person(s) or organization(s) described in Paragraph 8.a.(2)of this endorsement (hereinafter re- ferred to as additional insured) whom you are required to add as an additional insured under this Coverage Part by reason of a written contract, written agree- ment, written permit or written authorization. (2)Only the following persons or or- ganizations are additional in- sureds under this endorsement, and insurance coverage provided to such additional insureds is lim- ited as provided herein: (a) Managers Or Lessors Of Premises The manager or lessor of a premises leased to you with whom you have agreed per Paragraph 8.a.(1)of this en- dorsement to provide insur- ance, but only with respect to liability arising out of the ownership, maintenance or use of that part of the prem- ises leased to you, subject to the following additional exclusions: This insurance does not ap- ply to: (i)Any "occurrence" which takes place after you cease to be a tenant in that premises; (ii)Structural alterations, new construction or demolition operations performed by or on be- half of such additional insured. (b) Lessor Of Leased Equip- ment Any person or organization from whom you lease equipment when you and such person(s) or organiza- tion(s) have agreed per Par- agraph 8.a.(1)of this en- dorsement to provide insur- ance. Such person(s) or or- ganization(s) are insureds only with respect to liability for "bodily injury", "property damage" or "personal and advertising injury" caused, in whole or in part, by your maintenance, operation or use of equipment leased to you by such person(s) or or- ganization(s). A person's or organization's status as an additional insured under this endorsement ends when their contract or agreement with you for such leased equipment ends. However, this insurance does not ap- ply to any "occurrence" which takes place after the equipment lease expires. (c) Vendors Any person or organization (referred to below as ven- dor) with whom you have agreed per Paragraph 8.a.(1)of this endorsement to provide insurance, but on- ly with respect to "bodily in- jury" or "property damage" arising out of "your products" which are distributed or sold in the regular course of the DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 12 of 17 vendor's business, subject to the following additional exclusions: (i)The insurance afforded the vendor does not apply to: 1)"Bodily injury" or "property damage" for which the ven- dor is obligated to pay damages by reason of the as- sumption of liability in a contract or agreement. This exclusion does not apply to liability for damages that the vendor would have in the absence of the contract or agreement; 2)Any express war- ranty unauthorized by you; 3)Any physical or chemical change in the product made intentionally by the vendor; 4)Repackaging, ex- cept when un- packed solely for the purpose of in- spection, demon- stration, testing, or the substitution of parts under in- structions from the manufacturer, and then repackaged in the original con- tainer; 5)Any failure to make such inspections, adjustments, tests or servicing as the vendor has agreed to make or normal- ly undertakes to make in the usual course of busi- ness, in connection with the distribution or sale of the products; 6)Demonstration, in- stallation, servicing or repair opera- tions, except such operations per- formed at the ven- dor's premises in connection with the sale of the product; 7)Products which, af- ter distribution or sale by you, have been labeled or re- labeled or used as a container, part or ingredient of any other thing or sub- stance by or for the vendor; or 8)"Bodily injury" or "property damage" arising out of the sole negligence of the vendor for its own acts or omis- sions or those of its employees or anyone else acting on its behalf. How- ever, this exclusion does not apply to: a)The excep- tions contained in Paragraphs (c) (i) 4) or 6) of this en- dorsement;or b)Such inspec- tions, adjust- ments, tests or servicing as the vendor has agreed to make or nor- mally under- takes to make in the usual course of business, in connection with the distri- bution or sale of the prod- ucts. (ii)This insurance does not apply to any insured person or organization: 1)From whom you have acquired such products, or any ingredient, part DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 13 of 17 or container, enter- ing into, accompa- nying or containing such products; or 2)When liability in- cluded within the "products- completed opera- tions hazard" has been excluded un- der this Coverage Part with respect to such products. (d) State Or Governmental Agency Or Subdivision Or Political Subdivision - Permits Or Authorizations Relating To Premises Any state or governmental agency or subdivision or po- litical subdivision with which you have agreed per Para- graph 8.a.(1)of this en- dorsement to provide insur- ance, subject to the follow- ing additional provision: This insurance applies only with respect to the following hazards for which the state or governmental agency or subdivision or political sub- division has issued a permit or authorization in connec- tion with premises you own, rent or control and to which this insurance applies: (i)The existence, mainte- nance, repair, construc- tion, erection or removal of advertising signs, awnings, canopies, cel- lar entrances, coal holes, driveways, man- holes, marquees, hoist away openings, side- walk vaults, street ban- ners or decorations and similar exposures; or (ii)The construction, erec- tion or removal of eleva- tors; or (iii)The ownership, mainte- nance or use of any el- evators covered by this insurance. (e) Mortgagee, Assignee Or Receiver Any person or organization with whom you have agreed per Paragraph 8.a.(1) of this endorsement to provide in- surance, but only with re- spect to their liability as mortgagee, assignee, or re- ceiver and arising out of the ownership, maintenance, or use of the premises by you. However, this insurance does not apply to structural alterations, new construction and demolition operations performed by or for that per- son or organization. (3)The insurance afforded to addi- tional insureds described in Par- agraph 8.a.(1)of this endorse- ment: (a)Only applies to the extent permitted by law; and (b)Will not be broader than that which you are required by the written contract, written agreement, written permit or written authorization to pro- vide for such additional in- sured; and (c)Does not apply to any per- son, organization, vendor, state, governmental agency or subdivision or political subdivision, specifically named as an additional in- sured under any other provi- sion of, or endorsement added to, this Coverage Part, provided such other provision or endorsement covers the injury or damage for which this insurance ap- plies. b.With respect to the insurance afford- ed to the additional insureds de- scribed in Paragraph 8.a.(1)of this endorsement, the following is added to Section III - Limits Of Insurance : The most we will pay on behalf of the additional insured is the amount of in- surance: (1)Required by the written contract, written agreement, written permit or written authorization described DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 14 of 17 in Paragraph 8.a.(1)of this en- dorsement; or (2)Available under the applicable Limits of Insurance shown in the Declarations; whichever is less. This endorsement shall not increase the applicable Limits of Insurance shown in the Declarations. c. Section IV - Commercial General Liability Conditions is amended to include the following: Automatic Additional Insured Pro- vision This insurance applies only if the "bodily injury" or "property damage" occurs, or the "personal and advertis- ing injury" offense is committed: (1)During the policy period; and (2)Subsequent to your execution of the written contract or written agreement, or the issuance of a written permit or written authori- zation, described in Paragraph 8.a.(1). d. Section IV - Commercial General Liability Conditions is amended as follows: Condition 5. Other Insurance is amended to include: Primary And Noncontributory In- surance This insurance is primary to and will not seek contribution from any other insurance available to an additional insured per Paragraph 8.a.(1)of this endorsement provided that: (1)The additional insured is a Named Insured under such other insurance; and (2)You have agreed in writing in a contract, agreement, permit or authorization described in 8.a.(2) of this endorsement that this in- surance would be primary and would not seek contribution from any other insurance available to the additional insured. 9. Property Damage To Borrowed Equip- ment a.The following is added to Exclusion 2.j. Damage To Property under Sec- tion I - Coverage A - Bodily Injury And Property Damage Liability: Paragraphs (3)and (4)of this exclu- sion do not apply to tools or equip- ment loaned to you, provided they are not being used to perform operations at the time of loss. b.With respect to the insurance provid- ed by this section of the endorse- ment, the following additional provi- sions apply: (1)The Limits of Insurance shown in the Declarations are replaced by the limits designated in Section B. Limits Of Insurance , 9. Property Damage To Borrowed Equipment of this endorsement with respect to coverage provid- ed by this endorsement. These limits are inclusive of and not in addition to the limits being re- placed. The Limits of Insurance shown in Section B. Limits Of Insurance, 9. Property Damage To Borrowed Equipment of this endorsement fix the most we will pay in any one "occurrence" re- gardless of the number of: (a)Insureds; (b)Claims made or "suits" brought; or (c)Persons or organizations making claims or bringing "suits". (2) Deductible Clause (a)Our obligation to pay dam- ages on your behalf applies only to the amount of dam- ages for each "occurrence" which are in excess of the Deductible Amount stated in Section B. Limits Of Insur- ance, 9. Property Damage To Borrowed Equipment of this endorsement. The limits of insurance will not be re- duced by the application of such deductible amount. (b) Section IV - Commercial General Liability Condi- tions, 2. Duties In The Event Of Occurrence, Of- fense, Claim Or Suit, ap- plies to each claim or "suit" irrespective of the amount. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 15 of 17 (c)We may pay any part or all of the deductible amount to effect settlement of any claim or "suit" and, upon no- tification of the action taken, you shall promptly reim- burse us for such part of the deductible amount as has been paid by us. 10. Employees As Insureds - Specified Health Care Services And Good Samar- itan Services Paragraph 2.a.(1)(d)under Section II - Who Is An Insured does not apply to: a.Your "employees" who provide pro- fessional health care services on your behalf as a duly licensed nurse, emergency medical technician or paramedic in the jurisdiction where an "occurrence" or offense to which this insurance applies takes place; or b.Your "employees" or "volunteer work- ers", other than an employed or vol- unteer doctor, providing first aid or good samaritan services during their work hours for you will be deemed to be acting within the scope of their employment by you or performing du- ties related to the conduct of your business. 11. Broadened Notice Of Occurrence Paragraph a.of Condition 2. Duties In The Event Of Occurrence, Offense, Claim Or Suit under Section IV - Com- mercial General Liability Conditions is replaced by the following: a.You must see to it that we are notified as soon as practicable of an "occur- rence" or an offense which may result in a claim. To the extent possible, no- tice should include: (1)How, when and where the "oc- currence" or offense took place; (2)The names and addresses of any injured persons and wit- nesses; and (3)The nature and location of any injury or damage arising out of the "occurrence" or offense. This requirement applies only when the "occurrence" or offense is known to an "authorized representative". 12.Nonowned Aircraft The following is added to Exclusion 2.g. Aircraft, Auto Or Watercraft under Sec- tion I - Coverage A - Bodily Injury And Property Damage Liability: This exclusion does not apply to an air- craft you do not own, provided that: a.The pilot in command holds a current effective certificate, issued by a duly constituted authority of the United States of America or Canada, desig- nating that person as a commercial or airline transport pilot; b.The aircraft is rented with a trained, paid crew; and c.The aircraft does not transport per- sons or cargo for a charge. 13. Bodily Injury Redefined Section V - Definitions, 4. "Bodily injury" is replaced by the following: 4."Bodily injury" means bodily harm or injury, sickness, disease, disability, humiliation, shock, fright, mental an- guish or mental injury, including care, loss of services or death resulting from any of these at any time. 14. Expected Or Intended Injury Redefined The last sentence of Exclusion 2.a. Ex- pected Or Intended Injury under Sec- tion I - Coverage A - Bodily Injury And Property Damage Liability is replaced by the following: This exclusion does not apply to "bodily injury" or "property damage" resulting from the use of reasonable force to protect per- sons or property. 15. Former Employees As Insureds The following is added to Paragraph 2. under Section II - Who Is An Insured: 2. Each of the following is also an in- sured: Any of your former "employees", di- rectors, managers, members, part- ners or "executive officers", including but not limited to retired, disabled or those on leave of absence, but only for acts within the scope of their em- ployment by you or for duties related to the conduct of your business. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 16 of 17 16. Voluntary Property Damage Coverage a. Coverage D - Voluntary Property Damage Coverage Section I - Coverages is amended to include the following: (1) Insuring Agreement (a)We will pay the cost to re- pair or replace "property damage" to property of oth- ers arising out of operations incidental to your business when: 1)Damage is caused by you; or 2)Damage occurs while in your possession. At your written request, we will make this payment re- gardless of whether you are at fault for the "property damage". If you, at our request, re- place, or make any repairs to, damaged property of others, the amount we will pay under Voluntary Prop- erty Damage Coverage will be determined by your actu- al cost to replace or repair the damaged property, ex- cluding any profit or over- head. Any payment we make un- der Voluntary Property Damage Coverage shall not be interpreted as an admis- sion of liability by you or by us. It shall be your duty, not our duty, to defend any claim or "suit" to which this insurance applies. No other obligation or liabil- ity to pay sums or perform acts or services is covered. (b)This insurance applies to "property damage" only if: 1)The "property damage" takes place in the "cov- erage territory"; and 2)The "property damage" occurs during the policy period. (2) Exclusions This insurance does not apply to "property damage" that would be excluded by Coverage A - Bodi- ly Injury And Property Damage Liability, 2. Exclusions , except for j. Damage To Property, par- agraphs (3), (4), (5) and (6), k. Damage To Your Product , and l. Damage To Your Work . (3) Definitions For purposes of Voluntary Property Damage Coverage only, the following definitions un- der Section V - Definitions are replaced by the following: 16."Occurrence" means an in- cident, including continuous or repeated exposure to substantially the same gen- eral harmful conditions that result in "property damage". 20."Property damage" means physical injury to tangible property. "Electronic data" is not tangible property, and "property damage" does not include disappearance, ab- straction or theft. b. Care, Custody Or Control Liability Coverage For purposes of the coverage provid- ed by Care, Custody Or Control Li- ability Coverage in this endorsement only: (1) Section I - Coverage A - Bodily Injury And Property Damage Liability, 2. Exclusions, j. Damage To Property , Subpara- graphs (3), (4) and (5)do not ap- ply to "property damage" to the property of others described therein. (2)It shall be your duty, not our duty, to defend any claim or "suit" to which this insurance applies. No other obligation or liability to pay sums or perform acts or ser- vices is covered. This Paragraph (2) supersedes any provision in the Coverage Part to the contrary. (3)"Property damage" for which Care, Custody Or Control Lia- bility Coverage provides cover- DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B Includes copyrighted material of Insurance GA 233 09 17 Services Office, Inc., with its permission.Page 17 of 17 age shall be deemed to be caused by an "occurrence" but shall not serve to limit or restrict the applicability of any exclusion for "property damage" under this Coverage Part. c. Limits Of Insurance And Deducti- bles For purposes of the coverage provid- ed by Voluntary Property Damage Coverage and Care, Custody Or Control Liability Coverage, Section III - Limits Of Insurance is amended to include the following: (1)The Limits of Insurance shown in the Declarations are replaced by the limits designated in Section B. Limits Of Insurance, 16. Voluntary Property Damage Coverage And Care, Custody Or Control Liability Coverage, in this endorsement. These limits are inclusive of, and not in addi- tion to, the limits being replaced. The Limits of Insurance shown in the Schedule fix the most we will pay regardless of the number of: (a)Insureds; (b)Claims made or "suits" brought; or (c)Persons or organizations making claims or bringing "suits". (2) (a) Subject to (3)below, the Voluntary Property Dam- age Coverage, Each Occur- rence Limit Of Insurance is the most we will pay for the sum of damages under Vol- untary Property Damage Coverage; (b)The Care, Custody Or Con- trol Liability Coverage, Each Occurrence Limit Of Insurance is the most we will pay for the sum of damages under Care, Custody Or Control Liability Coverage; because of all "property damage" arising out of any one "occur- rence". (3)The Voluntary Property Dam- age Coverage, Aggregate Limit Of Insurance is the most we will pay for the sum of all damages under Voluntary Property Damage Coverage. This limit applies separately to each "cov- erage term". (4) Deductible Clause (a)Our obligation to pay dam- ages on your behalf applies only to the amount of dam- ages for each "occurrence" which are in excess of the Deductible Amount stated for the applicable coverage in the Schedule. The limits of insurance will not be re- duced by the application of such Deductible Amount. (b) Section IV - Commercial General Liability Condi- tions, 2. Duties In The Event Of Occurrence, Of- fense, Claim Or Suit, ap- plies to each claim or "suit" irrespective of the amount. (c)We may pay any part or all of the Deductible Amount to effect settlement of any claim or "suit" and, upon no- tification of the action taken, you shall promptly reim- burse us for such part of the Deductible Amount as has been paid by us. 17. Broadened Contractual Liability - Work Within 50' Of Railroad Property Section V - Definitions, 12. "Insured con- tract" is amended as follows: a.Paragraph c.is replaced by the fol- lowing: c.Any easement or license agree- ment; b.Paragraph f.(1)is deleted in its entire- ty. 18. Alienated Premises Exclusion 2.j. Damage to Property, Paragraph (2)under Section I - Cover- age A - Bodily Injury And Property Damage Liability does not apply if the premises are "your work". DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B This page has been left blank intentionally. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B AA 4172 09 09 THIS ENDORSEMENT CHANGES THE POLICY PLEASE READ IT CAREFULLY BLANKET WAIVER OF SUBROGATION AUTO This endorsement modifies insurance provided under the following: BUSINESS AUTO COVERAGE FORM This endorsement changes the policy effective on the inception date of the policy unless another date is indi cated below Endorsement Effective:Policy Number: Named Insured: Countersigned by: (Authorized Representative) With respect to coverage provided by this endorsement, the provisions of the Coverage Form apply unless modified by the endorsement 1 Blanket Waiver of Subrogation SECTION IV BUSINESS AUTO CONDI TIONS, A Loss Conditions, 5 Transfer of Rights of Recovery Against Others to Us is amended by the addition of the following: We waive any right of recovery we may have against any person or organization because of payments we make for "bodily injury" or "property damage" arising out of the operation of a covered "auto" when you have assumed liability for such "bodily injury" or "property damage" under an "insured contract", pro vided the "bodily injury" or "property damage" occurs subsequent to the execution of the "in sured contract" WB Brawley Company EPP051714701/01/2022 DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B This page has been left blank intentionally. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B AA 4174 11 05 THIS ENDORSEMENT CHANGES THE POLICY PLEASE READ IT CAREFULLY PRIMARY AND NONCONTRIBUTORY INSURANCE This endorsement modifies insurance provided under the following: BUSINESS AUTO COVERAGE FORM This endorsement changes the policy effective on the inception date of the policy unless another date is indi cated below Endorsement Effective: Policy Number: Named Insured: Countersigned by: (Authorized Representative) With respect to coverage provided by this endorsement, the provisions of the Coverage Form apply unless modified by the endorsement 1 Noncontributory Insurance SECTION IV BUSINESS AUTO CONDI TIONS, B General Conditions, 5 Other In surance is replaced by the following: c Regardless of the provisions of Para graph a above, this Coverage Form’s Li ability Coverage is primary and we will not seek contribution from any other in surance for any liability assumed under an "insured contract" that requires liability to be assumed on a primary noncon tributory basis EPP0517147 WB Brawley Company DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B This page has been left blank intentionally. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B THIS ENDORSEMENT CHANGES THE POLICY. PLEASE READ IT CAREFULLY. ADDITIONAL INSURED BY CONTRACT This endorsement modifies insurance provided under the following: BUSINESS AUTO COVERAGE FORM GARAGE COVERAGE FORM This endorsement changes the policy effective on the inception date of the policy unless another date is indicated below. With respect to coverage provided by this endorsement, the provisions of the Coverage Form apply unless modified by the endorsement. SECTION II – LIABILITY COVERAGE, A. Coverage, I. Who is an Insured is amended to include as an insured any person or organization with which you have agreed in a valid written contract to provide insurance as is afforded by this policy. This provision is limited to the scope of the valid written contract. This provision does not apply unless the valid written contract has been executed prior to the “bodily injury” or “property damage”. AA 4171 11 05 WB Brawley Company EPP0517147 DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B This page has been left blank intentionally. DocuSign Envelope ID: 1798465A-4756-4942-A886-77C465B1D31B