Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
2022-307-E-AMS-ProNet Systems-Efland EMS and Me quarters access and security
Revised 06/21 1 [Departmental Use Only] TITLE Efland EMS Security_Access FY 2022-2023 NORTH CAROLINA CONSTRUCTION AGREEMENT UNDER $250,000.00 ORANGE COUNTY THIS CONSTRUCTION AGREEMENT (hereinafter called “Agreement”), made as of the 20th day of July, 2022, by and between ProNet Systems, Inc, (hereinafter called the “Contractor”), and Orange County, a political subdivision of the State of North Carolina, (hereinafter called the “County,” “Orange County,” or “Owner”). W I T N E S S E T H: That the Contractor and the Owner, for the consideration herein named, agree as follows: 1. CONTRACT DOCUMENTS; PRIORITY The Contract Documents consist of this Agreement, the Request for Proposals, Proposal, Construction Drawings, and Written Specifications. The Contract Documents form the Contract. In the event of any inconsistency between or among the Contract Documents the Contract Documents shall be interpreted in the following order of priority: a. This Agreement. b. Designer Approved Bulletins and Field Orders. c. Request for Proposals and addenda thereto. d. Proposal. 2. SCOPE OF WORK The Contractor shall furnish and deliver all of the materials, and perform all of the work required by this Agreement within the time period stipulated in a written Notice-to-Proceed to be executed by the Contractor and Owner and in accordance with the following enumerated documents, which are made a part hereof as if fully contained herein: a. Construction Drawings prepared by Stewart-Cooper-Newell (Sheet 1.10 Life Safety Plan, 4.11 Floor Plan Notes, 4.70 Door and Hardware Schedule, 4.71 Door and Window Schedule, 10.40 Ceiling Plan Systems dated 12/31/2021) b. Written specifications prepared by the project engineer. c. ProNet Systems, Inc proposal dated April 4, 2022 which fully describes the work to be performed. Such work will hereafter be called the “Work”. d. Related documents listed under Section 1 above. DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E Revised 06/21 2 3. TERM AND SCHEDULING a. The Contractor agrees to commence work pursuant to the written Notice to Proceed. b. The Contractor agrees to complete substantially all Work by August 15, 2023. c. Time is of the essence with respect to all dates specified in the Contract Documents as Completion Dates. d. The Contractor shall perform the Work in the time, manner, and form required by the Contract Documents and as stipulated in a written Notice-to-Proceed to be executed by the Contractor and Owner. e. It is expressly understood that the Owner will employ other contractors to perform work as a part of the Project whose work will be performed simultaneously and sequentially with the performance of the Work by the Contractor. It shall be necessary for the Contractor to coordinate its activities with such other contractors, particularly with respect to access to work areas, storage of materials and other common facilities. f. Should the Owner determine that the Contractor is behind schedule Owner may require, at no additional cost to the Owner, the Contractor to expedite and accelerate its efforts, including providing additional resources and working overtime, as necessary, to perform the Work in accordance with the approved project schedule. 4. STANDARD OF CARE a. The Contractor shall exercise reasonable care and diligence in performing the Work in accordance with the highest generally accepted standards of this type of Contractor practice throughout the United States and in accordance with applicable federal, state and local laws and regulations applicable to the performance of these services. Contractor is solely responsible for the professional qualit y, accuracy and timely completion and submission of all work. b. The Contractor shall not load or permit any part of the Work to be loaded with a weight that will endanger its safety, intended performance or configuration. c. Contractor shall be responsible for all errors or omissions caused by its employees, agents, contractors, or assigns in the performance of the Agreement. Contractor shall correct any and all errors, omissions, discrepancies, ambiguities, mistakes or conflicts at no additional cost to the Owner. d. Contractor is an independent contractor of Owner. Any and all employees of the Contractor engaged by the Contractor in the performance of any work or services required of the Contractor under this Agreement, shall be considered employees or agents of the Contractor only and not of the Owner, and any and all claims that may or might arise under any workers compensation or other law or contract on behalf of said employees while so engaged shall be the sole obligation and responsibility of the Contractor. e. If activities related to the performance of this Agreement require specific licenses, DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E Revised 06/21 3 certifications, or related credentials Contractor represents that it or its employees, agents and subcontractors engaged in such activities possess such licenses, certifications, or credentials and that such licenses certifications, or credentials are current, active, and not in a state of suspension or revocation. f. The Contractor is responsible for all physical damage to owned or rented machinery, tools, equipment, forms, and other items owned, rented or used by the Contractor and Subcontractor(s) in the performance of the Work including all of Owner’s property in Contractor’s care, custody, or control, and all such property while it is in transit. g. The Contractor is solely responsible for obtaining all permits necessary to complete the Work in compliance with all local, state, and federal laws. 5. PAYMENT & TAXES a. The Owner hereby agrees to pay to the Contractor for the faithful performance of this Agreement, and the Contractor hereby agrees to perform all of the Work for a sum not-to- exceed Twenty-Eight Thousand Two Hundred Twenty Dollars ($28,220.00). Not later than the fifth (5th) day of each calendar month the Contractor shall submit to the Owner’s Representative, generally the architect if an architect is retained on the Work, a Request for Payment for work done during the previous calendar month. i. The Request for Payment shall be in form of a standardized invoice or AIA Document G702-703 appropriately addressed to Owner’s Representative at PO Box 8181, Hillsborough, NC 27278 and shall show substantially the value of work done during the previous calendar month. ii. The amount due for payment shall be ninety-five percent (95%) of the value of work completed since the last Request for Payment and this amount shall be paid by the Owner on or before the last business day of the month. Owner shall retain five percent (5%). 1. Upon Owner’s Representative’s certification that ninety percent (90%) of the Work has been satisfactorily completed retainage may be discontinued. Retainage may be discontinued, at Owner’s Discretion, so long as work continues to be completed satisfactorily and on schedule. iii. Final payment shall not be due to the Contractor until thirty (30) days after one hundred percent (100%) of the Work, including punch list work, has been satisfactorily (as determined by the County) completed and an appropriate affidavit as required in Section 7(c) below has been received by Owner. b. Should Owner reasonably determine that Contractor has failed to perform the Work related to a Request for Payment, Owner, at its discretion may provide the Contractor ten (10) days to cure the breach. Owner may withhold the accompanying payment without penalty until such time as Contractor cures the breach. i. Should Contractor or its representatives fail to cure the breach within ten (10) days, or fail to reasonably agree to such modified schedule, Owner may immediately terminate this Agreement in writing, without penalty or incurring further obligation to Contractor. ii. This section shall not be interpreted to limit the definition of breach to the failure to perform the Work related to a Request for Payment. DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E Revised 06/21 4 c. The Contractor has included in the Contract Price and shall pay all taxes assessed by any authority on the Work or the labor and materials used therein. It shall be the Contractor's responsibility to furnish the Owner documentary evidence showing the materials used and sales and use tax paid by the Contractor and each of its subcontractors. 6. INSURANCE AND BONDS a. Minimum requirements – Contractor shall obtain, at its sole expense, Commercial General Liability Insurance, Automobile Insurance, Workers’ Compensation Insurance, and any additional insurance as may be required by Owner’s Risk Manager as such insurance requirements are described in the Orange County Risk Transfer Policy and Orange County Minimum Insurance Coverage Requirements (each document is incorporated herein by reference and may be viewed at http://www.orangecountync.gov/departments/purchasing_division/contracts.php). If Owner’s Risk Manager determines additional insurance coverage is required such additional insurance shall be designated here N/A (if no additional insurance required mark N/A as being not applicable). Contractor shall not commence construction work until such insurance is in effect and certification thereof has been received by the Owner's Risk Manager. b. Performance Bonds – Contractor shall furnish bonds covering the faithful performance of the Contract and payment of all obligations arising under any of the Contract Documents or related in any way to the Work. Contractor shall immediately furnish a copy of such bonds to any requesting person who appears to be a potential beneficiary of bonds covering payment obligations arising under any of the Contract Documents. This subsection 6(b) applies only to Contracts of fifty thousand dollars ($50,000.00) or more where the total cost for the project is three hundred thousand dollars ($300,000.00) or more. 7. INDEMNITY a. To the extent authorized by North Carolina law the Contractor shall indemnify, without limitation, and hold harmless to the maximum extent permitted by law the Owner and its agents and employees from and against any and all claims, damages, losses and expenses, including attorney's fees, arising out of or resulting from the performance or nonperformance of the Work, provided that any such claim, damages, loss or expense (A) is attributable to bodily injury, sickness, disease or death or injury to, or destruction of, property, including the loss of use resulting therefrom; and (B) is caused in whole or in part by any breach of any provision of the Agreement or by any negligent or wrongful act or omission of the Contractor, any Subcontractor, or supplier of the Contractor, anyone directly or indirectly employed by any of them or anyone for whose acts any of them may be liable. The indemnification obligation under this paragraph shall not be limited in any way by any limitation of the amount or type of damages, compensation or benefits payable by or for the Contractor or any subcontractor under workers' compensation acts, disability benefits acts or other employee benefit acts. It is the intent of this section that the Contractor shall indemnify the County to the maximum extent allowed by law. b. The Contractor shall indemnify and hold harmless Owner from any lien of whatever type through the purchase of appropriate bonds and insurance as designated in Section 6 above. In the event any such lien is filed against Owner’s property Contractor shall, through such DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E Revised 06/21 5 bonds and insurance or at Contractors expense, defend Owner against all such claims of lien. c. Upon completion of the Work the Contractor shall execute an affidavit stating there are no unpaid debts for any work that has been done or materials that have been furnished to the project prior to and as of the date of substantial completion and further stating that Contractor shall indemnify, save and protect Owner and Owner’s lender, if any, harmless from and against any and all claims, liabilities, losses, damages, causes of action, and expenses (including court costs and reasonable attorney’s fees related thereto) arising out of, in connection with, or resulting from any such debts and liens. Such indemnification shall be in a form and substance acceptable to Owner. d. By executing this Agreement Contractor agrees to abide by and be bound by the indemnification provisions herein and of Section 7(c) specifically. 8. DISPUTE RESOLUTION AND GOVERNING LAW a. Any dispute with respect to any provision of, or the performance or non-performance of, this Agreement shall be subject to the Dispute Resolution Rules and Procedures for Orange County Design, Building Construction, Renovation, and Repair Projects. The policy is incorporated herein by reference and may be viewed at http://www.orangecountync.gov/departments/purchasing_division/contracts.php). b. The laws of the State of North Carolina shall apply to the interpretation and enforcement of this Agreement. Any and all suits or actions to enforce, interpret or seek damages with respect to any provision of, or the performance or nonperformance of, this Agreement or the Contract shall be brought in the General Court of Justice of North Carolina sitting in Orange County, North Carolina and it is agreed by the parties that no other court shall have jurisdiction or venue with respect to such suits or actions. c. Notice of any claim by Owner or Contractor must be initiated by written notice to the other Party within thirty (30) days of the occurrence of the event giving rise to the claim or within thirty (30) days of the discovery of the event or condition giving rise to the claim, whichever is later. i. Should any claim be made, regardless of whether such claim is made by Owner or Contractor, Contractor shall continue to faithfully and diligently perform the Work in such a manner as to meet all scheduled timelines. Any failure to faithfully and diligently perform the Work may be deemed, by the Owner, a breach of the Contract. ii. If a claim is made such claim shall be made to the initial decision maker, if applicable, who may request more supporting data, reject the claim in whole or in part, approve the claim in whole or in part or advise the parties the claim is unable to be resolved. iii. If a claim is made by the Owner the Owner may, but is not obligated to, notify the surety. 9. NON–APPROPRIATION a. Contractor acknowledges that Owner is a governmental entity, and the validity of this Agreement is based upon the availability of public funding under the authority of its statutory mandate. DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E Revised 06/21 6 b. In the event that public funds are unavailable or not appropriated for the performance of Owner’s obligations under this Agreement, then this Agreement shall automatically expire without penalty to Owner immediately upon written notice to Contractor of the unavailability or non-appropriation of public funds. It is expressly agreed that Owner shall not activate this non-appropriation provision for its convenience or to circumvent the requirements of this Agreement. c. In the event of a change in the Owner’s statutory authority, mandate or mandated functions, by state or federal legislative or regulatory action, which adversely affects Owner’s authority to continue its obligations under this Agreement, then this Agreement shall automatically terminate without penalty to Owner upon written notice to Contractor of such limitation or change in Owner’s legal authority. 10. NOTICES Any notice required by this Agreement shall be in writing and delivered by certified or registered mail, return receipt requested to the following: Owner: Contractor: Orange County ProNet Systems, Inc Attn: A. Barnes Attn: Alan Jelley P.O. Box 8181 3200 Glen Royal Road, Ste 107 Hillsborough, NC 27278 Raleigh, NC 27617 11. MISCELLANEOUS a. Duties and Obligations imposed by the Contract Documents shall be in addition to any Duties and Obligations imposed by state, federal or local law, rules, regulations and ordinances. b. No act or failure to act by the Owner or Contractor shall constitute a waiver of any right or duty granted them under the Contract Documents, nor shall any act or failure to act constitute any approval except as specifically agreed in writing. c. The Work shall be tested and inspected as required by the Contract Documents and as required by law. Unless prohibited by law the costs of all such tests and inspections related to state and federal codes such as ADA, Administrative, Electrical, Plumbing, Mechanical and Building Codes shall be borne by the Contractor. The costs for material and structural testing shall be conducted by an independent third party at the expense of the Owner. Delays related to any of the aforementioned tests and inspections shall not be grounds for delaying the completion of the work. If any such tests and inspections reveal deficiencies in the Work such that the Work does not comply with terms or requirements of the Contract Documents and the requirements of any code or law the Contractor is solely responsible for the cost of bringing such deficiencies into compliance with the terms of the Contract Documents and any code or law. d. Should the Architect, if an architect is retained for the project involving the Work, or Owner reject any portion of the Work for failing to comply with the Contract Documents Contractor shall immediately, at Contractor’s expense, correct the Work. Any such rejection may be made before or after substantial completion. If applicable, any additional DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E Revised 06/21 7 expense borne by the Architect under this section shall be paid at Contractor’s expense. e. The Contractor shall not assign any portion of this Agreement nor subcontract the Work in its entirety without the prior written consent of the Owner. f. By executing this Agreement Contractor affirms that Contractor and any subcontractors of Contractor are and shall remain in compliance with Article 2 of Chapter 64 of the North Carolina General Statutes. g. By executing this Agreement Contractor certifies that Contractor has not been identified, and has not utilized the services of any agent or subcontractor identified, on the list created by the State Treasurer pursuant to G.S. 147-86.58. h. By executing this Agreement Contractor certifies that Contractor has not been identified, and has not utilized the services of any agent or subcontractor identified, on the list created by the State Treasurer pursuant to G.S. 147-86.81. i. The County has designated (Angel Barnes) to act as the County's representative with respect to the Work and shall have the authority to render decisions within guidelines established by the County Manager or the County Board of Commissioners and shall be available during working hours as often as may be reasonably required to render decisions and to furnish information. j. Contractor shall at all times remain in compliance with all applicable local, state, and federal laws, rules, and regulations including but not limited to all state and federal non- discrimination laws, policies, rules, and regulations and the Orange County Non- Discrimination Policy and Orange County Living Wage Policy (each policy is incorporated herein by reference and may be viewed at http://www.orangecountync.gov/departments/purchasing_division/contracts.php). Any violation of the Orange County Non-Discrimination Policy is a breach of this Agreement and County may immediately terminate this Agreement without further obligation on the part of the County. This paragraph is not intended to limit and does not limit the definition of breach to discrimination. k. This Agreement together with any amendments or modifications may be executed electronically. All electronic signatures affixed hereto evidence the consent of the Parties to utilize electronic signatures and intent of the Parties to comply with Article 11A and Article 40 of North Carolina General Statute Chapter 66. l. In the event of a breach by Contractor Owner has sole authority to determine the reasonableness of Contractor’s actions to remedy such breach or complete the performance of its obligations. m. Upon request of the Owner, the Contractor shall submit to County all relevant documentation, including but not limited to, job cost records, to support its claims for final compensation and if such request is made final compensation shall not be due until all relevant documentation is received, reviewed, and approved by Owner. 12. CONSEQUENTIAL AND LIQUIDATED DAMAGES DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E Revised 06/21 8 a. Owner and Contractor mutually waive any claim against each other for consequential damages. Consequential Damages include: i. Damages incurred by Owner for loss of use, income, financing, or business. ii. Damages incurred by Contractor for office expenses, including personnel, loss of financing, profit, income, business, damage to reputation, or any other non-direct damages. b. Liquidated damages shall be in accord with the Contract Documents. If the Contract Documents do not otherwise address liquidated damages, such damages shall be in the amount of five hundred dollars ($500.00) per day. 13. TERMINATION OR SUSPENSION a. The Owner may, without cause, order the Contractor to terminate, suspend, delay or interrupt the Work in whole or in part for such period of time as the Owner may determine. i. If Owner issues a written order to delay, suspend, or interrupt the Work, and such order is not due to or as a result of any fault on the part of the Contractor or any subcontractor, the Contractor may recover a per diem amount of five hundred dollars ($500.00) per day with a not-to-exceed limit of ten thousand dollars ($10,000.00). ii. In the event of termination by the Owner under this Agreement, the Contractor shall be entitled to receive its reasonable and documented direct costs prior to termination, including the cost of materials purchased for the Work which purchases cannot be canceled or which material cannot reasonably be used by the Contractor on other work, and the cost of closing down the work in a safe and efficient manner. iii. If Owner elects to suspend or terminate the contract pursuant to subparagraphs 13.a.i. or 13 a.ii. the sole remedy available to the Contractor are those listed in the subparagraphs and Contractor is not entitled to any right to further claims for any amount owed or disputed or for payment of damages alleged to have been sustained as a result of Owner’s order to delay, suspend, or interrupt the Work. b. The Owner may, with cause, order the Contractor to suspend, delay or interrupt the Work in whole or in part for such period of time as the cause remains. i. If Owner issues a written order to delay, suspend, or interrupt the Work, and such order is due to or as a result of any fault on the part of the Contractor or any subcontractor, the Owner may reduce payment at a per diem amount of five hundred dollars ($500.00) per day. c. Contractor may terminate the Contract if, at the Owner’s written direction, the Work is stopped for twenty one (21) consecutive days through no act or fault of the Contractor, their agents or employees, or a subcontractor or their agents or employees or any other person performing work pursuant to the Contract Documents. Contractor may terminate the Contract if a Court or other Public authority having jurisdiction enters a lawful order DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E Revised 06/21 9 that requires all work to be stopped and such stoppage lasts for twenty one (21) consecutive days. d. Either party may terminate this Agreement upon notice to the other party that obligations pursuant to this Agreement are made impossible due to declarations of emergency by Orange County or by North Carolina due to events directly impacting Orange County. Both parties shall remain responsible for all payment and performance due up to the receipt of such notice, but shall have no further obligation or responsibility beyond that date provided the terminating party has taken all reasonable steps to complete the performance of its obligations. 14. ENTIRE AGREEMENT All of the documents listed, referenced or described in this Agreement, the written Notice-to- Proceed, together with Modifications made or issued in accordance herewith are the Contract Documents, and the work, labor, materials and completed construction required by the Contract Documents and all parts thereof is the Work. The Contract Documents constitute the entire agreement between Owner and Contractor. This Agreement may be amended only by written instrument signed by both parties. Modifications may be evidenced by facsimile signatures. If any provision of the Agreement shall be declared invalid or unenforceable, the remainder of the Agreement shall continue in full force and effect. IN WITNESS WHEREOF, the Parties hereto have executed this Agreement as of the day and date first above written wholly or in a number of counterparts each of which shall, without proof or accounting for other counterparts, be deemed an original contract. ORANGE COUNTY CONTRACTOR ____________________________________ ________________________________________ Signature Signature County Manager ________________________________________ Printed Name and Title DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E 7/22/2022 Vice President 7/22/2022 Revised 06/21 10 ORANGE COUNTY—DEPARTMENT USE ONLY ______________________________________________________________________________ Party/Vendor Name: ProNet Systems, Inc Party/Vendor Contact Person: Richard McCleanny (RichardM@pronetsystemsnc.com) Contact Phone: 919.277.2070 Party/Vendor Address: 3200 Glen Royal Road Suite 107 City Raleigh State: NC Zip: 27617 Department: AMS/ES Amount: $28,220.00 Purpose: Efland EMS & ME Quarters Access & Security Budget Code(s): 61370035-880001-10053 Vendor # 57979 (N/A if new vendor) Vendor is a BOCC consultant? Yes No Contract Type: (Check one) New Renewal Amendment Effective Date 7/20/2022 Approved by Board Yes No Agenda Date: --- For Section XIV. c. contracts only, Approved by Board in Current FY Budget Yes No This agreement is approved as to technical form and content and I as Department Director affirmat ively state work on this project has not been initiated prior to execution of the agreement: Department Director’s Signature ________________________________________ Date: ________ Agreements for emergency services or repair are not subject to the abo ve affirmation. If services related to this agreement have already begun or been completed please briefly describe the nature of the emergency condition that was addressed: N/A Risk Management This agreement is approved for sufficiency of insurance standards, specifications, and requirements: Office of the Risk Management Officer___________________________________ Date: _________ Financial Services This instrument has been pre-audited in the manner required by the Local Government Budget and Fiscal Control Act: Office of the Chief Financial Officer ____________________________________ Date: _________ Legal Services This agreement is approved as to legal form and sufficiency: Office of the County Attorney __________________________________________Date: ________ Clerk to the Board Received for record retention: All Docusign contracts must be copied to the Clerk upon completion: occlerkdocs@orangecountync.gov The following signature block is for hard copies only and is not req uired for Docusign contracts: Office of the Clerk to the Board __________________________________________Date:_________ DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E 7/22/2022 7/22/2022 7/22/2022 7/22/2022 Q040422-B Orange County-Efland EMS and Medical Examiner’s Office Access Control ProNet Systems, Inc. 1 3200 GLEN ROYAL ROAD, SUITE 107, RALEIGH, NC 27617 www.pronetsystemsonline.com TELEPHONE 919.277.2070 FAX 919.277.2072 Q040422-B Orange County-Efland EMS and Medical Examiner’s Office Access Control April 4, 2022 Ms. Angel Barnes Orange County Asset Management Services PO Box 8181 Hillsborough, NC 27278 Dear Ms. Barnes, RE: ORANGE COUNTY – EFLAND EMS AND MEDICAL EXAMINER’S OFFICE ACCESS CONTROL With reference to your request for a proposal for access control Efland EMS and Medical Examiner’s Office in Orange County. Our proposal is detailed below for your review. Equipment Description Quantity Equipment Description Unit Price Total Price 1 Altronix AL1012ULXPD8 12V 10 Amp Power Supply 286.19 286.19 1 Altronix AL1024ULACM 24V 10 Amp Power Supply 359.09 359.09 1 Lenel CTX-6 Cabinet 283.50 283.50 11 Bosch DS160 Request to Exit 77.76 855.36 11 GE 1078 Door Status Switch 10.80 118.80 1 Lenel LNL-2220 Intelligent Controller 1,768.50 1,768.50 5 Lenel LNL-1320-S3 Dual Door Interface 819.45 4,097.25 11 HID R40 Switchplate Card Reader 189.00 2,079.00 11 HES 1006 HES Electric Strike Complete 377.99 4,157.89 Cable and Installation Materials 2,065.85 Equipment Total Including Cable and Materials 16,071.43 Add Labor 9,790.41 Add Estimated Shipping 388.75 Add 7.5 % Sales Tax 1,968.79 Total Price Including Equipment, Labor, Sales Tax, and Shipping $28,219.38 DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E Q040422-B Orange County-Efland EMS and Medical Examiner’s Office Access Control ProNet Systems, Inc. 2 Warranty All products are covered for one year, parts and labor, from date of hand over. An extended maintenance program is available. This includes parts and labor on all products for the second year after date of hand over. Service Rates Out of warranty call out is charged at $100.00 per hour and $135.00 per hour out of hours (regular business hours are 8.00 am to 5.00 pm, Monday to Friday). Response time is same day if service call is requested before 10.00 am or if the system is down due to failure. All product is covered for one year, parts and labor, from date of hand over. A Service Contract for an extended maintenance program is offered if required. This includes parts and labor on all products for the second year after date of hand over. Service Contract A maintenance program is offered below. Full Maintenance 2nd year $ 700.28 per year Terms of Payment Unless otherwise arranged, 50% of payment is due upon receipt of the order, and 50% of payment is due upon project completion. Interest will be charged at a rate of 1.5% per month on accounts 10 days past due and a 2% discount is offered for payment within 10 days of receipt of invoice. Validity These rates are valid for a period of thirty days from today’s date. We trust that in submitting this proposal we have addressed all your requirements. Should you require further clarification or additional information, please do not hesitate to contact us. Sincerely, Alan Jelley ProNet Systems, Inc. Accepted: Signed ………………………………………………. For and On Behalf of Orange County …………………………………………………..………………………… Print Name & Title Date…………………………………………………. DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E REF. REF. W D W D DW 48 SF 200 LOBBY 1325 SF 121 BAYS APPARATUS 193 SF 102 CORRIDOR 116 SF 100 LOBBY126 SF 103 WORKROOM GENERAL 58 SF 101 TOILET 445 SF 105 DAYROOM 161 SF 119 LAUNDRY DECON. 190 SF 118 STORAGE GENERAL 302 SF 109 CORRIDOR 103 SF 115 SHOWER TOILET 103 SF 114 SHOWER TOILET 274 SF 108 EXERCISE 105 SF 110 ROOM BUNK 106 SF 111 ROOM BUNK 106 SF 112 ROOM BUNK 107 SF 113 ROOM BUNK 105 SF 107 CORRIDOR 254 SF 104 KITCHEN M IN . D IST. BETW EEN D O O R S88'-5 27/32" / 3 = 29' - 5 15/16"DISTANCE BET W EEN EXIT DO ORS = 58'-1 3/16"MIN. DIST. BETW EEN DOORS42'-10 9/16" / 3 = 14' - 3 1/2"6 CR 1 8 3 16 8 9 WIDTH REQUIRED = 6 X 0.2" = 1.2" 72" PROVIDED WIDTH REQUIRED = 1 X 0.2" = 0.2" 72" PROVIDED WIDTH REQUIRED = 8 X 0.2" = 1.6" 36" PROVIDED WIDTH REQUIRED = 3 X 0.2" = 0.6" 36" PROVIDED WIDTH REQUIRED = 16 X 0.2" = 3.2" 36" PROVIDED WIDTH REQUIRED = 8 X 0.2" = 1.6" 36" PROVIDED WIDTH REQUIRED = 9 X 0.2" = 1.8" 36" PROVIDED EXIT DISTANCE 26' - 10" EXIT DISTANCE 74' - 0" 36 SF 120 VESTIBULE 126 SF 116 VESTIBULE CR CR 1 1 1 12 11 11 5 5 4 2 2A 1A1A1A 1A 1B 1A 1A 7 5 5 4 3 3 6 8 8 8 8 8 8 CR CR CR CR CR CR CR 7 7710A 10 10 2A 2A 1A 1A 1A 98 SF 202 SHOWER TOILET 69 SF 203 WORK ROOM 180 SF 206 COOLER 26 SF 204 CLOSET JANITOR 43 SF 207 ELEC. ROOM 45 SF 201 CORRIDOR 286 SF 123 PATIO 18 SF 106 I.T. 212 SF 205 WORK AREA EXAMINERS 12 SF 117 JANITOR 3 5 5 5 2 2 2 2 2 2 1B 1B 1B FEC FEFEC 10 FEC FEC 2A 2A 5 9 DISTANCE BETWEEN EXIT DOORS = 27'-2"EXIT DISTANCE 55' - 2"45 MIN.45 MIN.45 MIN.45 MIN.90 MIN.45 MIN.FEFEFEC 2 222 FECEXTERIOR RATED P P P P P P P 2 11 SIM CR 1A 1A FEC1. FIRESTOP AROUND ALL PIPE, CONDUIT, DUCTWORK AND ANY OTHER PENETRATIONS THROUGH RATED WALLS. PENETRATIONS OF NON-RATED PARTITIONS AND FLOORS SHALL BE FIRESTOPPED WITH NON- COMBUSTIBLE MATERIAL. 2. PROVIDE NON-COMBUSTIBLE BLOCKING SECURELY ANCHORED IN ALL WALLS BEHIND ALL TOILET ACCESSORIES, BASE CABINETS, WALL CABINETS VISUAL DISPLAY BOARDS AND ALL OTHER SURFACE MOUNTED ITEMS. PROVIDE NON-COMBUSTIBLE FRAMING SECURELY ANCHORED TO WALL FRAMING TO PROVIDE ANCHORING SURFACE FOR ITEMS RECESSED IN WALLS. 3. COORDINATE ALL WALL FINISHES, IE GYP. BD. -PAINTED, BACKER BD. -TILE, WITH SHEET 7.10 PRIOR TO INSTALLATION. 4. FURR WALLS AROUND FIRE EXTINGUISHER CABINETS AS REQUIRED. SEE THIS SHEET FOR FIRE EXTINGUISHER LOCATIONS AND DETAILS. 5. VERIFY QUANTITY AND LOCATION OF FIRE EXTINGUISHERS. PROVIDE FIRE EXTINGUISHER WALL MOUNT WHERE FE IS NOT ON PLANS. PROVIDE FIRE EXTINGUISHER AND CABINET WHERE FEC IS NOT ON PLANS. SEE SPECIFICATIONS FOR REQUIREMENTS FOR ALL FIRE EXTINGUISHERS & CABINETS. COORDINATE ANY CHANGE OF FE OR FEC LOCATION WITH ARCHITECT. 6. FIRE EXTINGUISHERS TO BE SPEC'D ON A ROOM TO ROOM BASIS, BASED ON COMBUSTIBLES WITHIN GIVEN ROOMS. FIRE EXTINGUISHER KITCHEN 104 (1) GENERAL STORAGE 118 (1) APPARATUS BAYS 121 (2) FIRE EXTINGUISHER CABINET (FEC) -SEMI RECESSED CORRIDOR 102 (1) CORRIDOR 109 (1) VESTIBULE 116 (1) DECON. LAUNDRY (1) MORGUE WORK AREA 205 (1) FIRE EXTINGUISHER CABINET -EXTERIOR RATED PATIO 123 (1) EXIT DISCHARGE FIRE EXTINGUISHER CABINET FIRE EXTINGUISHER SURFACE MOUNTED EXIT SIGN (SEE ELECT. DRAWINGS) FEC SMOKE DETECTOR (SEE ELECT. DRAWINGS) S FE I5 WALL TYPE (SEE SHEET 1.70) PANIC HARDWARE LOCATIONSP 1 OR 2 HOUR FIRE RATED WALL. SEE WALL TYPES ON SHEET 1.70 CARD READERCR 2 HOUR FIRE RATED WALLFULLY RECESSEDSEMI RECESSED6" STUD 3 5/8" STUDVERIFY W/ LOCAL CODE3'-2" A.F.F.2'-4"VERTICAL CABINET DOOR FIRE EXTINGUISHER CABINET, SEE SPECS WRAP OPENING W/ 5/8" GWB PER WALL TYPES SEE LIFE SAFETY PLAN THIS SHEET FOR LOCATION OF CABINETS NOTE: VERIFY SIZE OF CABINET AND ROUGH OPENING REQUIREMENTS WITH MANUFACTURER PRIOR TO FRAMING. FINISH FLOOR ELEV. 0'-0" FINISH FLOOR ELEV. 0'-0"VERIFY W/ LOCAL CODE4'-0" A.F.F.Project No. Sheet No. GENERAL LIFE SAFETY NOTES FIRE EXTINGUISHER SCHEDULE DETAILS AND NOTES LEGEND SCALE AS NOTED Date: Drawn by: Checked by: Revisions: AJP/GAS JRS/GAS 1.800.671.0621www.scn-architects.com719 East Second AvenueGastonia, NC 28054Phone: 704.865.6311Fax: 704.865.00461637 1.10NEW EMS STATION #4 & MEDICAL EXAMINER'SQUARTERS FOR ORANGE COUNTYLIFE SAFETY PLAN3800 US HWY 70 EFLAND, NC 2724312/31/2021 12/31/2021 1/8" = 1'-0"1 LIFE SAFETY PLAN 1" = 1'-0"3 FIRE EXTINGUISHER CABINET 1" = 1'-0"2 FIRE EXTINGUISHER DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E REF. REF. W D W D DW 5.102 5.10 5.10 5 4 200 LOBBY 121 BAYS APPARATUS 102 CORRIDOR 100 LOBBY 103 WORKROOM GENERAL 101 TOILET 105 DAYROOM 119 LAUNDRY DECON. 118 STORAGE GENERAL 109 CORRIDOR 115 SHOWER TOILET 114 SHOWER TOILET 108 EXERCISE 110 ROOM BUNK 111 ROOM BUNK 112 ROOM BUNK 113 ROOM BUNK 107 CORRIDOR 104 KITCHEN 116 VESTIBULE 120 VESTIBULE 121A A -13 121B A -13 121C B -13 121D B -13 201 K1 162 119A J 104 116 G1 84 118A H 134 103 K 1514 101 L 93 118B N 2114 115 L 916 114 L 916 112 M 1117 111 M 1117 110 M 1117 100B E 25 108 D 66 119B N 182 100A C 110 200 C 111 109A K 72 105 C 112 109B J1 418 102 K 72 205 T/T1 59 207 H/H 38 121E G 47 123 PATIO 1 5.20 2 5.20 7 5.20 8 5.20 5 5.20 3 5.20 4 5.20 6 5.20 SLOPE 1/8"/FT. TO DRAIN SLOPE 1/8"/FT. TO DRAINSLOPE 1/8"/FT. TO DRAINSLOPE 1/8"/FT. TO DRAIN4'x7' DOOR AS SUPPLIED BY COOLER MANU. SLOPE 1/8"/FT. TO DRAIN SLOPE 1/8"/FT. TO DRAINSLOPE 1/8"/FT. TO DRAINSLOPE 1/8"/FT. TO DRAIN4.80 1 4.80 2 4.80 3 4.80 4 106 I.T. 106 P/P 141 4.21 1104 F 2215 5.103 4.20 2 4.20 1 OXYGEN TANK STORAGE RACK BY OWNER 204 O 192 W1 W7 ABOVE. SEE ELEV. 202 SHOWER TOILET 203 WORK ROOM 206 COOLER 204 CLOSET JANITOR 207 ELEC. ROOM 201 CORRIDOR 205 WORK AREA EXAMINERS 117 JANITOR 136 G1 84 113 M 1117 117 N 122 122 R/R 172 203 S 202 202 L1 92 W2 W2 W6 W5 W5 W4 W4 W4 W4 W3 5.10 6 5.40 4 3 5.31 W8 CR CR CR CR CR CR CR CR CR CR 4.81 1 4.20 7 --- - 4.20 9 4.20 10 --- - 4.20 11 4.20 12 4.20 8 ADD BLOCKING FOR MIRROR WALL 4.20 13 4.20 14 1.71 7 4.20 16 4.20 17 4.20 18 4.20 19 4.20 20 4.20 19 Sim 4.20 20 Sim CR DOOR TAG WINDOW TAG CARD READER LOCATION FLOOR DRAIN LOCATION CR 101 C 92 W1 FD METAL STUD WALL ASSEMBLY CMU WALL ASSEMBLY CMU & VENEER WALL ASSEMBLY FLOOR PLAN LEGEND METAL STUD & VENEER WALL ASSEMBLY FLOOR PLAN NOTES 1. ALL CONTRACTORS MUST MAKE ON SITE VISITATIONS TO PROJECT SITE PRIOR TO BIDDING TO FAMILIARIZE THEMSELVES WITH THE EXTENT OF CONSTRUCTION. 2. DISCREPANCIES: THE CONTRACTOR SHALL INFORM THE ARCHITECT IN WRITING OF ANY DISCREPANCIES OR OMISSIONS NOTED ON THE DRAWINGS OR IN THE SPECIFICATIONS OR OF ANY VARIATIONS NEEDED IN ORDER TO CONFORM TO CODES, RULES AND REGULATIONS. UPON RECEIPT OF SUCH INFORMATION, THE ARCHITECT WILL SEND WRITTEN INSTRUCTION TO ALL CONCERNED. ANY SUCH DISCREPANCY, OMISSION OR VARIATION NOT REPORTED SHALL BE THE RESPONSIBILITY OF THE CONTRACTOR AND WORK SHALL BE PERFORMED IN A MANNER DIRECTED BY THE ARCHITECT. 3. EXISTING CONDITIONS: ALL EXISTING INFORMATION WAS TAKEN FROM DRAWINGS FURNISHED BY OTHERS WHICH MAY OR MAY NOT BE CORRECT. THE CONTRACTOR SHALL VERIFY ALL DIMENSIONS, ELEVATIONS AND CONDITIONS AT THE JOB SITE. ANY DISCREPANCIES OR VARIATIONS FROM THE CONDITIONS SHOWN ON THE DRAWINGS SHALL BE BROUGHT TO THE ATTENTION OF THE ARCHITECT IN WRITING. 4. THE GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR THE PROTECTION OF PERSONS USING THE SURROUNDING FACILITIES WHO COME INTO CONTACT WITH THE AREA OF CONSTRUCTION. HE SHALL PROPERLY BARRICADE THE AREA TO PREVENT INTRUSION BY PERSONS NOT ASSOCIATED WITH CONSTRUCTION. 5. DRAWING SCALES: THESE DRAWINGS ARE PREPARED TO THE SCALE NOTED, HOWEVER, DIMENSIONS ARE NOT TO BE DERIVED BY SCALING THE PLANS, SECTIONS OR DETAILS. IF THERE IS ANY QUESTIONS ABOUT DIMENSIONS OR DETAILS, CONTACT THE ARCHITECT FOR INFORMATION PRIOR TO STARTING WORK. 6. ALL NOTES APPLY TO ALL DRAWINGS AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. 7. THE REQUIREMENTS OF THE DRAWINGS, GENERAL REQUIREMENTS AND ALL ITEMS OF THE CONTRACT DOCUMENTS ARE EQUALLY BINDING ON ALL CONTRACTORS AND TRADES. EACH CONTRACTOR IS REQUIRED TO KEEP FULL SETS OF THE CONTRACT DOCUMENTS FOR HIS/HERS EMPLOYEES USE ON THE PROJECT TO ASSURE THAT ALL WORK IS PROPERLY COORDINATED AND INSTALLED WITH THE WORK OF OTHER CONTRACTORS AND TRADES. 8. CONTRACTORS SHALL MEET WITH THE ARCHITECT PRIOR TO CONSTRUCTION OF THE PROJECT TO REVIEW ALL EXISTING CONDITIONS AND THE EXACT EXTENT OF THE WORK TO BE COMPLETED. 9. ALL WORK SHALL BE IN ACCORDANCE WITH THE 2018 NC BUILDING CODE AND ALL OTHER LOCAL CODES AND REGULATIONS HAVING JURISDICTION. 10. THE GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR PROTECTING ALL EXISTING CONSTRUCTION AROUND THE SITE WHICH WILL REMAIN. ANY DAMAGES SHALL BE REPAIRED TO THE OWNER'S SATISFACTION AT NO COST. 11. SLOPE ALL EXTERIOR LANDINGS, WALKS, PORCHES, STEPS, ETC. 1/8" : 12" AWAY FROM THE BUILDING FOR DRAINAGE UNLESS NOTED OR SHOWN OTHERWISE. 12. FRAMING LUMBER IN CONTACT WITH MASONRY, CONCRETE OR STEEL SHALL BE PRESSURE TREATED. 13. GENERAL CONTRACTOR SHALL PROVIDE ALL MISCELLANEOUS LOOSE STEEL LINTELS AS REQUIRED WHERE MECHANICAL, PLUMBING OR ELECTRICAL EQUIPMENT PASS THRU WALLS OR OVER ANY BUILT-IN ITEMS IN MASONRY WALLS. 14. SLOPE FLOOR TO FLOOR DRAINS. COORDINATE ALL FLOOR DRAINS WITH PLUMBING CONTRACTOR. 15. PROVIDE WEEP HOLES @ 16" O.C. OVER ALL MASONRY OPENINGS. 16. PROVIDE FIRE TREATED LUMBER AS REQUIRED BY THE BUILDING CODE. 17. FIRE PENETRATION NOTES APPLY TO ALL TRADES. 18. PROVIDE BLOCKING IN METAL STUD WALLS AS REQUIRED FOR ALL SUSPENDED ITEMS INCLUDING BUT NOT LIMITED TO E.W.C., TOILET ACCESSORIES, PLUMBING, MECHANICAL, ELECTRICAL & ETC. - COORDINATE WITH OTHER TRADES. 19. SEE ELEVATIONS FOR EXTERIOR WALL MASONRY CONTROL JOINTS (CJ) LOCATIONS. CONTROL JOINTS TO BE IN MASONRY JOINTS. LOCATE WALL CONTROL JOINTS AS INDICATED. 20. FURR WALLS AS REQUIRED FOR MECHANICAL AND PLUMBING VENTS. 21. DO NOT CUT ANY LAY-IN ACOUSTICAL CEILING PANELS LESS THAN 6" UNLESS INSTRUCTED BY THE ARCHITECT. LAY-IN CEILING PANELS TO BE EQUALLY SPACED IN AREA. 22. DIMENSIONS SHOWN ON FLOOR PLANS ARE TO FACE OF STUD UNLESS NOTED OTHERWISE (SEE FLOOR PLAN NOTES ON SHEET 4.10). 23. UNLESS NOTED OTHERWISE, CARRY ALL FIRE RATED WALLS AND PARTITIONS TO STRUCTURE ABOVE. 24. NO CORE OF BLOCKS SHOULD BE EXPOSED. USE SOLID BLOCK WHERE REQUIRED TO KEEP CORES FROM BEING VISIBLY EXPOSED. 25. WALL TO TERMINATE 12" ABOVE HIGHEST ADJACENT CEILING U.N.O. 26. THERE SHALL BE NO EXPOSED CONDUIT ON THE EXPOSED CMU OR ANY OTHER WALLS. Project No. Sheet No. ALL NOTES APPLY TO ALL DRAWINGS AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. THE REQUIREMENTS OF THE DRAWINGS, GENERAL REQUIREMENTS AND ALL ITEMS OF THE CONTRACT DOCUMENTS ARE EQUALLY BINDING ON ALL CONTRACTORS AND TRADES. EACH CONTRACTOR IS REQUIRED TO MAINTAIN FULL SETS OF THE CONTRACT DOCUMENTS FOR HIS EMPLOYEES USE ON THE PROJECT TO ASSURE THAT ALL WORK IS PROPERLY COORDINATED AND INSTALLED WITH THE WORK OF OTHER CONTRACTORS AND TRADES. WHENEVER THERE ARE DISCREPANCIES BETWEEN DRAWINGS, OR BETWEEN THE DRAWINGS AND SPECIFICATIONS, OR CONFLICTS WITHIN THE SPECIFICATIONS AND/OR DRAWINGS, AND SUCH DISCREPANCY IS NOT CALLED TO THE ARCHITECT'S ATTENTION IN TIME TO PERMIT CLARIFICATION BY ADDENDUM, THE CONTRACTOR SHALL BASE HIS BID UPON PROVIDING THE BETTER QUALITY OR GREATER OF WORK OR MATERIAL CALLED FOR, SHALL SUBMIT A WRITTEN STATEMENT WITH HIS PROPOSAL NOTING SUCH DISCREPANCIES, AND SHALL SO FURNISH AND INSTALL SUCH BETTER QUALITY OR GREATER QUANTITY UNLESS OTHERWISE ORDERED IN WRITING. GENERAL NOTE Date: Drawn by: Checked by: Revisions: AJP/GAS JRS/GAS 1.800.671.0621www.scn-architects.com719 East Second AvenueGastonia, NC 28054Phone: 704.865.6311Fax: 704.865.00461637 4.11NEW EMS STATION #4 & MEDICALEXAMINER'S QUARTERS FOR ORANGECOUNTYFLOOR PLAN NOTES3800 US HWY 70 EFLAND, NC 2724312/31/2021 12/31/2021 1/8" = 1'-0"1 FLOOR PLAN NOTES PLAN NORTH DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E HARDWARE MANUFACTURERS: LOCK -LATCH HINGES CLOSERS CLOSER / HOLDERS EXIT DEVICES PUSH -PULLS PUSH PLATES FLUSH BOLTS STOPS KICKPLATES SILENCERS LOCK GUARDS THRESHOLDS WEATHERSTRIPPING SARGENT HAGAR, MCKINNEY, STANLEY LCN, SARGENT LCN, SARGENT VON DUPRIN ROCKWOOD ROCKWOOD GLYNN-JOHNSON, ROCKWOOD, IVES ROCKWOOD GLYNN-JOHNSON, IVES ZERO, REESE, NATIONAL GUARD ZERO, NATIONAL GUARD GLYNN-JOHNSON, ROCKWOOD, IVES, SARGENT GLYNN-JOHNSON, IVES HARDWARE NOTES: 1. THE FOLLOWING LIST OF HARDWARE ITEMS AND THEIR RESPECTIVE MANUFACTURERS ARE REPRESENTED BY SPECIFIC CATALOG NUMBERS IN THE HARDWARE SCHEDULE. HARDWARE ITEMS NOT SHOWN HERE WILL BE SPECIFICALLY CALLED OUT BY MANUFACTURER AND CATALOG NUMBER IN THE ACTUAL HARDWARE GROUP. 2. WHERE REQUIRED, HARDWARE SHALL MEET THE REQUIREMENTS OF THE ADA. 3. WHERE REQUIRED, PROVIDE HARDWARE AND ACCESSORIES THAT COMPLY WITH THE FIRE RATINGS OF THE OPENINGS OR WALLS IN WHICH THEY ARE LOCATED WHETHER INDICATED OR NOT. 4. SUBMIT MANUFACTURERS CUT SHEETS FOR ALL HARDWARE. HARDWARE WILL NOT BE REVIEWED BY THE ARCHITECT WITHOUT CUT SHEETS FOR ALL ITEMS SCHEDULED OR PROVIDED. 5. ALL HARDWARE SHALL BE INSTALLED IN STRICT ACCORDANCE WITH MANUFACTURERS WRITTEN INSTRUCTIONS. 6. MISCELLANEOUS REQUIRED HARDWARE ITEMS: CONTRACTOR AND HARDWARE SUPPLIER SHALL FURNISH ALL THE ITEMS INCLUDED HEREIN AS REQUIRED EVEN IF NOT LISTED IN THE HARDWARE GROUP SCHEDULE. A. HARDWARE FINISHES SHALL BE: 1. INTERIOR -US26D 2. EXTERIOR -US32D B. HINGES SHALL BE: 1. INTERIOR -HAGAR AB700 X US26D 2. EXTERIOR -HAGAR AB800 X US32D C. CLOSERS SHALL BE: 1. LCN 4040 SERIES X US26D IN REGULAR MOUNT OR PARALLEL ARM AS REQUIRED. 2. CLOSERS AND CLOSER / HOLDERS SHALL BE MOUNTED ON THE ROOM SIDE OF DOORS TO THE GREATEST EXTENT POSSIBLE. CLOSERS SHALL NOT BE MOUNTED ON CORRIDOR SIDE OF DOORS. D. DOOR STOPS SHALL BE: 1. WALL STOPS: IVES WS401CVX X US26D OR IVES WS402CVX X US26D 2. FLOOR STOPS: IVES FS436 X US26D OR IVES FS438 X 426D AS REQUIRED 3. EXTERIOR STOPS: IVES FS185 OR FS18L AS REQUIRED 4. PROVIDE FLOOR OR WALL STOPS FOR ALL DOORS AS REQUIRED. PROVIDE OVERHEAD STOPS WHERE FLOOR OR WALL STOPS ARE NOT APPLICABLE OR PRACTICAL. PROVIDE FLOOR STOPS OR OVERHEAD STOPS FOR ALL OUTSWINGING EXTERIOR DOORS. E. THRESHOLDS SHALL BE: 1. ZERO #566A -PLACE IN FULL BED OF SILICONE SEALANT. PROVIDE THRESHOLD AT ALL EXTERIOR DOORS AND AT ALL INTERIOR DOORS THAT ARE SUBJECT TO WATER MIGRATION FROM ONE SPACE TO ANOTHER SUCH AS BETWEEN MECHANICAL ROOMS AND ADJACENT ROOMS OR SUCH AS BETWEEN VEHICLE BAYS AND ADJACENT ROOMS. F. WEATHER STRIPPING SHALL BE: 1. ZERO #328AA -PROVIDE WEATHER-STRIPPING AT HEADS AND JAMBS OF ALL EXTERIOR DOORS. G. DOOR BOTTOM SWEEPS SHALL BE: 1. ZERO #39A -PROVIDE DOOR BOTTOM SWEEPS AT ALL EXTERIOR OUTSWINGING DOORS. H. WATER SHEDS SHALL BE: 1. ZERO #142A -PROVIDE WATER SHEDS AT ALL EXTERIOR DOORS EXPOSED TO WEATHER. ATTACH TO HEAD OF DOOR FRAME AND SET IN FULL BED OF SILICONE SEALANT. I. PROVIDE ZERO #188N DOOR SEALS FOR SMOKE STOPPING ON ALL RATED DOORS AS REQUIRED BY CODE. J. PROVIDE IVES SR64 SILENCERS AT ALL HOLLOW METAL DOOR FRAMES IN QUANTITY AS REQUIRED. *G.C. ALL CORES TO BE CORBIN RUSSWIN CORES WITH L-4 KEYWAYS AS USED BY OWNER ON ALL COUNTY FACILITIES* HARDWARE GROUPS: PIVOTS EXIT DEVICE STRIKE THRESHOLD WEATHERSTRIPPING BOTTOM RAIL SWEEP EXTERIOR ENTRANCE SINGLE DOOR (STOREFRONT) W/ CARD READER 1 KAWNEER TOP, INTERMEDIATE & BOTTOM OFFSET PIVOTS X MATCH STOREFRONT FINISH KAWNEER #69-177 CONT APPLIED DOOR STOPS W/ CONT PILE AND WEATHERSWEEPS (1) ADAMS RITE 8400 x US32D W/ CYLINDER DOGGING KAWNEER ALUMINUM (SET IN WATERPROOF MASTIC) KAWNEER #38-560 (MOUNT ON BOTTOM RAIL OF DOOR) X MATCH STOREFRONT FINISH CARD READER (1) ELECTRIC STRIKE -FAIL SECURE -BY OWNER (STAINLESS STEEL) (1) CARD READER BY OWNER-PROVIDE CONDUIT, J-BOX & COVER PLATE CLOSER W/ STOP (1) LCN 4040XP CUSH x US32D PULL (1) KAWNEER CO12 X US32D WEATHER SWEEPS KAWNEER TOP, INTERMEDIATE & BOTTOM X MATCH STOREFRONT FINISH INTERIOR ENTRANCE SINGLE DOOR (STOREFRONT) W/ CARD READER 2 LOCK-LATCH HINGES EXTERIOR H.M. PAIR OF DOORS (STORAGE) 3 (1) SARGENT -8205 -LW1J x US26D -KNURLED LEVER (3 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D GASKET (2) ZERO NO. 328 ALUMINUM HEAD & JAMB FLUSH BOLTS (2) ROCKWOOD 555 -12" x US26D (1) SARGENT -8294 -LW1J x US26D -KNURLED LEVER ZERO NO. 328 (2) GLYNN JOHNSON 550 X US32DOVERHEAD STOP WEATHERSTRIPPING LOCK-LATCH STRIKE THRESHOLD WEATHERSTRIPPING EXTERIOR H.M. SINGLE DOOR (CLOSER) W/ CARD READER 4 (1) VON DUPRIN 9847 x 626 ZERO NO. 328 ZERO NO. 566A (SET IN WATERPROOF MASTIC) CARD READER (1) ELECTRIC STRIKE -FAIL SECURE -BY OWNER (STAINLESS STEEL) (1) CARD READER BY OWNER-PROVIDE CONDUIT, J-BOX & COVER PLATE CLOSER W/ STOP (1) LCN 4040XP CUSH x US32D HINGES (1-1/2 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D WEATHER SWEEPS ZERO NO. 328 5 INTERIOR PASSAGE SINGLE DOOR (WOOD) DEADLATCH FIRE RATED @ EXERCISE 108 6 SILENCERS (3) IVES -SR64 CLOSER W/ STOP INTERIOR PASSAGE SINGLE DOOR (HOLLOW METAL) (CLOSER) 7 (1) LCN 4010 OR 4110 SERIES x US32D W/ OVERHEAD STOP HINGES (1-1/2 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D SILENCERS (3) IVES -SR64 LOCK-LATCHTOILET ROOM (WOOD) (CLOSER) (VINYL @ DOOR 202) 9 (1) SARGENT -8265 LW1J x US26D W/ MICROSHIELD HINGES (1-1/2 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D SILENCERS (3) IVES -SR64CLOSER W/ STOP (1) LCN 4010 OR 4110 SERIES x US32D W/ OVERHEAD STOP KICKPLATE (1) ROCKWOOD K1062 x 34" x 16" x US26D PIVOTS KAWNEER TOP, INTERMEDIATE & BOTTOM OFFSET PIVOTS X MATCH STOREFRONT FINISH CLOSER W/ STOP (1) LCN 2030N HOLD OPEN x MATCH STOREFRONT FINISH PUSH/PULL (1) KAWNEER CO12 X US32D (1) KAWNEER CPII X US32D LOCK-LATCHINTERIOR ENTRANCE (WOOD) FIRE RATED 11 (1) SARGENT -8256 LW1J x US26D W/ MICROSHIELD HINGES (1-1/2 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D SILENCERS (3) IVES -SR64 STOPS (1) IVES NO. WS401CVX OR WS402CVX x US26D WALL STOP LOCK-LATCHINTERIOR STOREROOM (WOOD)12 (1) SARGENT -8255 LW1J x US26D W/ MICROSHIELD HINGES (1-1/2 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D SILENCERS (3) IVES -SR64 LOCK-LATCH W/ CYLINDERINTERIOR STOREROOM PAIR OF DOORS (WOOD) FIRE RATED 14 (2) SARGENT -12-7000 X SG-26D HINGES (3 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D SILENCERS (4) IVES -SR64 STOPS (2) OVERHEAD -SARGENT 1540 SERIES LOCK-LATCHOFFICE (WOOD)15 (1) SARGENT -8255 LW1J x US26D W/ MICROSHIELD HINGES (1-1/2 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D SILENCERS (3) IVES -SR64 STOPS (1) IVES NO. WS401CVX OR WS402CVX x US26D WALL STOP LOCK-LATCHINTERIOR ENTRY SINGLE DOOR (HOLLOW METAL) (CLOSER) W/ CARD READER 8 HINGES (1-1/2 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D DECON ROOM (HOLLOW METAL) (CLOSER) W/ CARD READER 10 INTERIOR STOREROOM (HOLLOW METAL) (CLOSER) W/ CARD READER CYLINDER CORBIN RUSSWIN AS REQUIRED TO WORK WITH EXIT DEVICE (US32D) PIVOTS EXIT DEVICE STRIKE KAWNEER TOP, INTERMEDIATE & BOTTOM OFFSET PIVOTS X MATCH STOREFRONT FINISH CARD READER (1) ELECTRIC STRIKE -FAIL SECURE -BY OWNER (STAINLESS STEEL) (1) CARD READER BY OWNER-PROVIDE CONDUIT, J-BOX & COVER PLATE CLOSER W/ STOP (1) LCN 4040XP CUSH x US32D PULL (1) KAWNEER CO12 X US32D CYLINDER CORBIN RUSSWIN AS REQUIRED TO WORK WITH EXIT DEVICE (US32D) (1) ADAMS RITE 8400 x US32D W/ CYLINDER DOGGING (1) VON DUPRIN 996-NL TRIM x 626 PUSH/PULL (1) ROCKWOOD 102 x 70C x US32D PULL (1) ROCKWOOD 71C x US32D PUSH CLOSER W/ STOP (1) LCN 4010 OR 4110 SERIES x US32D W/ OVERHEAD STOP STRIKE CARD READER (1) ELECTRIC STRIKE -FAIL SECURE -BY OWNER (STAINLESS STEEL) (1) CARD READER BY OWNER-PROVIDE CONDUIT, J-BOX & COVER PLATE (1) VON DUPRIN 9875 x 626AM (1) VON DUPRIN 996-L TRIM x 626AM LOCK-LATCH (1) SARGENT -8265 LW1J x US26D W/ MICROSHIELD HINGES (1-1/2 PR.) HAGER -5" x 5" -AB700 x US26D CLOSER W/ STOP (1) LCN 4010 OR 4110 SERIES x US32D W/ OVERHEAD STOP KICKPLATE (1) ROCKWOOD K1062 x 34" x 16" x US26D STRIKE CARD READER (1) ELECTRIC STRIKE -FAIL SECURE -BY OWNER (STAINLESS STEEL) (1) CARD READER BY OWNER-PROVIDE CONDUIT, J-BOX & COVER PLATE LOCK-LATCH13 (1) SARGENT -8255 LW1J x US26D W/ MICROSHIELD HINGES (1-1/2 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D CLOSER W/ STOP (1) LCN 4010 OR 4110 SERIES W/ OVERHEAD STOP STRIKE CARD READER (1) ELECTRIC STRIKE -FAIL SECURE -BY OWNER (STAINLESS STEEL) (1) CARD READER BY OWNER-PROVIDE CONDUIT, J-BOX & COVER PLATE THRESHOLD (1) ZERO #566A ALUMINUM WEATHERSTRIPPING (1) ZERO #328 ALUMINUM (HEAD & JAMBS) AUTO. DOOR BOTTOM (1) ZERO #365AA THRESHOLD (1) ZERO #566A ALUMINUM WEATHERSTRIPPING (1) ZERO #328 ALUMINUM (HEAD & JAMBS) THRESHOLD (1) ZERO #566A ALUMINUM WEATHERSTRIPPING (1) ZERO #328 ALUMINUM (HEAD & JAMBS) LOCK-LATCHINTERIOR ENTRANCE (VINYL) (CLOSER) W/ CARD READER 16 (1) SARGENT -8205 LW1J x US26D W/ MICROSHIELD CLOSERS (1) LCN 4010 OR 4110 SERIES STOPS (1) IVES NO. WS401CVX OR WS402CVX x US26D WALL STOP SILENCERS (3) IVES -SR64 HINGES (1-1/2 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D STRIKE CARD READER (1) ELECTRIC STRIKE -FAIL SECURE -BY OWNER (STAINLESS STEEL) (1) CARD READER BY OWNER-PROVIDE CONDUIT, J-BOX & COVER PLATE LOCK-LATCHDECON ROOM (WOOD) (CLOSER) 18 (1) SARGENT -8265 LW1J x US26D W/ MICROSHIELD HINGES (1-1/2 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D SILENCERS (3) IVES -SR64 CLOSERS (1) LCN 4010 OR 4110 SERIES x US32D KICKPLATE (1) ROCKWOOD 1050 x 34" x 16" x US26D STOPS (1) IVES NO. WS401CVX OR WS402CVX x US26D WALL STOP LEVERINTERIOR STOREROOM (DOUBLE WOOD DOOR)17 (2) SARGENT -8293 LW1J X US26D W/ MICROSHIELD HINGES (3 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D SILENCERS (4) IVES -SR64 STOPS OVERHEAD -(2) SARGENT 1540 SERIES (2) IVES RL30 & RL30A x US32D LOCK-LATCHINTERIOR STOREROOM (VINYL) (CLOSER) 19 (1) SARGENT -8255 LW1J x US26D W/ MICROSHIELD HINGES (1-1/2 PR.) HAGER -5" x 5" -AB700 x US26D SILENCERS (3) IVES -SR64 CLOSER W/ STOP (1) LCN 4010 OR 4110 SERIES W/ OVERHEAD STOP LOCK-LATCHOFFICE (VINYL) (CLOSER) 20 (1) SARGENT -8255 LW1J x US26D W/ MICROSHIELD HINGES (2 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D SILENCERS (3) IVES -SR64 CLOSERS (1) LCN 4010 OR 4110 SERIES STOPS (1) IVES NO. WS401CVX OR WS402CVX x US26D WALL STOP WEATHERSTRIPPING (1) ZERO #188BIO GY WEATHERSTRIPPING (1) ZERO #188BIO GY AUTO. DOOR BOTTOM (1) ZERO #365AA AUTO. DOOR BOTTOM (1) ZERO #365AA LOCK-LATCHINTERIOR STOREROOM (WOOD) (CLOSER) 21 (1) SARGENT -8255 LW1J x US26D W/ MICROSHIELD HINGES (1-1/2 PR.) HAGER -4-1/2" x 4-1/2" -AB700 x US26D SILENCERS (3) IVES -SR64 CLOSER W/ STOP (1) LCN 4010 OR 4110 SERIES W/ OVERHEAD STOP AUTO. DOOR BOTTOM (1) ZERO #365AA AUTO. DOOR BOTTOM (1) ZERO #365AA AUTO. DOOR BOTTOM (1) ZERO #365AA AUTO. DOOR BOTTOM (1) ZERO #365AA LATCH GUARD IVES LG7 X US26D LATCH GUARD IVES LG7 X US26D DEADLATCH (1) ADAMS RITE MS1890 SILENCERS (3) IVES SR64 (2) SARGENT TRIM -12-7000 ET X SG-26D LOCK-LATCH THRESHOLD WEATHERSTRIPPING EXTERIOR H.M. PAIR OF DOORS (CLOSER) W/ CARD READER (1) HAGER 7000 SERIES X SG-26D, WITH STRIKES; OUTSIDE FUNCTION 6, INSIDE FUNCTION 15 ZERO NO. 328 ZERO NO. 566A (SET IN WATERPROOF MASTIC) CLOSER W/ STOP (1) LCN 4040XP CUSH x US32D HINGES (1-1/2 PR.) SARGENT -4-1/2" x 4-1/2" -AB700 x US26D WEATHER SWEEPS ZERO NO. 328 GASKET (1) ZERO NO. 328 ALUMINUM HEAD & JAMBSLEFT LEAFLOCK-LATCH THRESHOLD WEATHERSTRIPPING (1) HAGER 7000 SERIES ELR X SG-26D, WITH STRIKES; OUTSIDE FUNCTION 6, INSIDE FUNCTION 15 ZERO NO. 328 ZERO NO. 566A (SET IN WATERPROOF MASTIC) CLOSER W/ STOP (1) LCN 4040XP CUSH x US32D HINGES (1-1/2 PR.) SARGENT -4-1/2" x 4-1/2" -AB700 x US26D WEATHER SWEEPS ZERO NO. 328 ASTRAGAL PEMKO 351VC GASKET (1) ZERO NO. 328 ALUMINUM HEAD & JAMBSRIGHT LEAFCARD READER (1) CARD READER BY OWNER-PROVIDE CONDUIT, J-BOX & COVER PLATE SILENCERS (3) IVES -SR64 THRESHOLD ZERO NO. 566A (SET IN WATERPROOF MASTIC) WEATHER SWEEPS ZERO NO. 328 ASTRAGAL PEMKO 351VC AUTO. DOOR BOTTOM (1) ZERO #365AA CLOSER W/ STOP (1) LCN 4010 OR 4110 SERIES x US32D W/ OVERHEAD STOP FLUSH BOLTS (2) IVES FB61P x US26D AUTOMATIC FLUSH BOLTS (1) IVES COR52 x US26D COORDINATOR LATCH INTERIOR PASSAGE SINGLE DOOR (STOREFRONT) 22 SILENCERS (3) IVES -SR64 PIVOTS KAWNEER TOP, INTERMEDIATE & BOTTOM OFFSET PIVOTS X MATCH STOREFRONT FINISH CLOSER W/ STOP (1) LCN 2030N HOLD OPEN x MATCH STOREFRONT FINISH LOCK-LATCH (1) ADAMS-RITE 4560 x US32D DOOR & FRAME NOTES: 1. ALL WOOD DOORS SHALL HAVE GRAIN TO MATCH AND COLOR SHADE TO BE CONSISTENT IN APPEARANCE. 2. PROVIDE LABELED FRAMES AND HARDWARE TO MATCH LABELED DOORS. 3. ALL EXTERIOR HOLLOW METAL DOORS NOT COVERED BY OVERHANG SHALL HAVE PEMKO INTERLOCKING WATER SHED (EXTRUDED ALUMINUM) CONSISTING OF PEMKO #347 AR AND PEMKO #68 AR ATTACHED TO THE HEAD OF THE DOOR. 4. WHEN SUBMITTING HARDWARE SHOP DRAWINGS, HARDWARE SUPPLIER SHALL FURNISH CUT SHEETS ON ALL ITEMS THAT DIFFER FROM THE MANUFACTURER THAT HAS BEEN SPECIFIED IN THESE ARCHITECTURAL DOCUMENTS. 5. PROVIDE STOPS FOR ALL DOORS. PROVIDE OVERHEAD STOP WHERE WALL OR FLOOR STOP IS NOT PRACTICAL OR APPLICABLE. 6. PROVIDE LOCK GUARD FOR ALL EXTERIOR HOLLOW METAL DOORS. 7. ALL SOLID CORE WOOD VENEER DOORS SHALL BE ROTARY SLICED WHITE BIRCH WITH FINISH TO MATCH ARCHITECTURAL SAMPLE. 8. ALL HOLLOW METAL DOORS TO BE HEAVY DUTY 1 3/4" METAL W/ CLOSED TOP & BOTTOM (SEE SPECS). 9. ALL CLOSERS SHALL BE IN ROOM & NOT IN CORRIDOR UNLESS OTHERWISE NOTED. 10. PROVIDE LABELED HOLLOW METAL FRAMES WHERE SCHEDULED, WHERE INSTALLED IN RATED WALLS OR REQ'D BY CODE. 11. SPECIAL HOLLOW METAL FRAMES SHALL BE AS DETAILED OR AS NOTED. 12. REMOVABLE MULLIONS WHERE SCHEDULED WITH HARDWARE SHALL BE PROVIDED BY THE HARDWARE SUPPLIER. PREPARE FRAMES TO RECEIVE REMOVABLE MULLIONS. 13. HOLLOW METAL FRAMES, DOORS & HARDWARE SHALL BE INSTALLED IN STRICT ACCORDANCE WITH MANUFACTURER'S WRITTEN INSTRUCTIONS. DOOR NUMBER DOOR TYPE HARDWARE GROUP NUMBER DOOR FRAME INSTALL NUMBER DOOR DESIGNATION KEY SHOWN ON SHEET 4.11 101 C 2 9 DOOR TAG LEGEND Project No. Sheet No. Date: Drawn by: Checked by: Revisions: AJP/GAS JRS/GAS 1.800.671.0621www.scn-architects.com719 East Second AvenueGastonia, NC 28054Phone: 704.865.6311Fax: 704.865.00461637 4.70NEW EMS STATION #4 & MEDICAL EXAMINER'SQUARTERS FOR ORANGE COUNTYDOOR AND HARDWARE SCHEDULES3800 US HWY 70 EFLAND, NC 2724312/31/2021 12/31/2021 FRAME INSTALLATION SCHEDULE Install Number Frame Type Head Jamb Sill Description 1 F9 1/4.72 1/4.72 - HM FRAME @ FIRE RATED WALL 2 F7 2/4.72 2/4.72 - HM FRAME @ 3-5/8" STUD WALL W/ GYP 3 F7 4/4.72 4/4.72 - HM FRAME @ 3-5/8" STUD WALL W/ TILE ON ONE SIDE 4 F9 7/4.72 7/4.72 7/4.72 5 F4 8/4.72 8/4.72 8/4.72 HM FRAME @ BALLISTIC 3-5/8" STUD WALL W/ GYP 6 F3 9/4.72 9/4.72 9/4.72 HM FRAME @ FIRE RATED WALL 7 F10 1/4.74 1/4.74 1/4.74 EXT HM FRAME @ 12" CMU WALL W/ BRICK VENEER 8 F10 2/4.74 2/4.74 - EXT HM FRAME @ 6" STUD WALL W/ BRICK VENEER 9 F5 2/4.73 2/4.73 2/4.73 EXT STOREFRONT @ 6" STUD WALL W/ BRICK VENEER 10 F1 1/4.73 1/4.73 1/4.73 EXT STOREFRONT @ CAST STONE ENTRY 11 F2 1/4.73 1/4.73 1/4.73 EXT STOREFRONT @ CAST STONE ENTRY 12 F6.1 2/4.73 2/4.73 2/4.73 EXT STOREFRONT @ 6" STUD WALL W/ BRICK VENEER 13 - 3/4.73 3/4.73 3/4.73 OVERHEAD DOOR @ 12" CMU WALL W/ BRICK VENEER 14 F7 5/4.72 5/4.72 - HM FRAME @ 6" STUD WALL W/ GYP 15 F4 5&5.1/4.72 5&5.1/4.72 5&5.1/4.72 HM FRAME @ 6" STUD WALL W/ GYP 16 F7 6/4.72 6/4.72 - HM FRAME @ 6" STUD WALL W/ TILE ON ONE SIDE 17 F7 3/4.72 3/4.72 - HM FRAME @ FIRE RATED WALL 18 F6 2/4.74 2/4.74 - DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E INTERIOR H.M. FRAME INTERIOR H.M. FRAME 14' x 14' OVERHEAD DOOR 14' x 14' OVERHEAD DOOR G-5 G-5 G-5 G-5 G-1 W2 F7 F9 A B2'-0"2'-0"2'-0"2'-0"2'-0"2'-0"2'-0"14'-0"E.Q.E.Q.E.Q.E.Q. 14'-0"2'-0"2'-0"2'-0"2'-0"2'-0"2'-0"2'-0"14'-0"14'-0" E.Q.E.Q.E.Q.E.Q.7'-0"7'-2"DOOR WIDTH 7'-0"7'-4"DOOR WIDTH 3'-4"8'-0"5'-0" 5'-4"3'-6"INTERIOR H.M. FRAME 90 MIN. FIRE RATED F87'-0"7'-2"6'-0" 6'-4" EXTERIOR H.M. FRAMEF107'-0"7'-4"2"2" DOOR WIDTH G-1 W110'-0"25'-4" 25'-8"7'-0"1'-10"G-1 G-1 G-1 G-1 G-1 G-1 G-1 G-1 G-1 G-1 G-1 2"2"2"2"2"2"2"2"2" 4'-1"4'-1"4'-1"4'-1"4'-1"4'-1"8"2"2"2"2"2"2" 2'-5"2'-5" G-1 G-1 G-1 G-1 W43'-4"8'-0"3'-0" 3'-4"3'-6"8"2"2"2"2"2" G-1 G-1 W53'-4"8'-0"3'-8" 4'-0"3'-6"8"2"2"2"2"2" G-1 G-1 8'-0"8'-8" 9'-0"6'-10"8"DOOR OPENING G-1 G-1 G-1 G-1 2"2"2"2"2"2" 2'-8"3'-0"2'-8" G-1 6'-10"8"DOOR OPENING G-1 G-1 2"2"2"2" 3'-10"3'-0" 7'-0" 7'-4"7'-2"8'-8" 9'-0" G-6 7'-0"2"2"2"2" 3'-0"2'-8"2'-8"8'-0"DOOR OPENING G-2*DOOR OPENING 2"2"2" 3'-0"3'-0" 6'-2" 6'-6"7'-2"7'-0"2"F1 F2 F3 F4 WOOD DOOR W/ KICKPLATE WD-1 WOOD DOOR W/ LITE WD-1 WOOD DOOR WD-1 STC 40; NRC 1 45 MIN FIRE RATED G-2 MLH 3'-0"3'-0"3'-0"7'-0"7'-0"7'-0"G-1 G 3'-0"7'-0"H.M. DOOR W/ LITE H.M. DOOR J 3'-0"7'-0"H.M. DOOR K 3'-6"7'-0"WOOD DOOR WD-1N 3'-0"7'-0"O 3'-8"7'-0"EXTERIOR STOREFRONT EXTERIOR STOREFRONT INTERIOR HOLLOW METAL 45 MIN FIRE RATED **ALT-BID A-2: FOR DETAILS REFER TO: 2/4.75 INTERIOR HOLLOW METAL *G-3 GLASS @ LOBBY 100 **ALT BID A-2: FOR DETAILS REFER TO: DOOR 104 - 3/4.75 DOOR 108 - 2/4.75 KICKPLATE 2"2"F5 EXTERIOR HOLLOW METAL7'-0"2"2"8"8'-0"2"2" 2'-11"2'-11" 6'-0" G-4 W62'-8"8'-0"11'-8" 12'-0"2"2"2"2"2" 2'-9 1/2"2'-9 1/2"5'-0"2" 2'-9 1/2" 2" 2'-9 1/2" F6 EXTERIOR HOLLOW METAL7'-0"8'-0"2"3'-0" 3'-4"2"2"8"G-1G-1 G-1 2"2" 2'-11"2'-11" 2" 6'-4" G-1 G-1 9'-4"8"2"W78"2"2"8'-0"7'-0"2"2"2"2" WOOD DOOR WD-1 90 MIN FIRE RATED P 3'-0"7'-0"WOOD LOUVER DOOR WD-1 R 2'-4"7'-0"G-5 G-1 W32'-8"8'-0"5'-0" 5'-4"4'-2"8"2"2"2"2"2"2" 2'-5"2'-5" G-1 G-1 G-1 3'-0"3'-8" 6'-4" G-6 VINYL DOOR W/ KICKPLATE VN-1 VINYL DOOR W/ LITE VN-1 *(G-4 GLASS) L1K1 EXTERIOR ALUM. STOREFRONT DOOR G-1 C7'-0"3'-0" D WOOD DOOR W/ FULL LITE WD-1 G-3 E 3'-0" WOOD DOOR W/ FULL LITE WD-1 ACOUSTIC DOOR STC 40; NRC 1 G-2 F 3'-0" WOOD DOOR W/ FULL LITE WD-1 ACOUSTIC DOOR STC 40; NRC 1 45 MIN FIRE RATED *(G-6 GLASS) 3'-0"7'-0"VINYL DOOR VN-1 W/ PROTECT. PLATE (MORGUE SIDE ONLY) S STAINLESS STEEL PROTECTION PLATE H.M. DOOR W/ LITE W/ PROTECT. PLATE (MORGUE SIDE ONLY) T 4'-0"7'-0"STAINLESS STEEL PROTECTION PLATE STAINLESS STEEL PROTECTION PLATE VINYL DOOR VN-1 W/ PROTECT. PLATE (MORGUE SIDE ONLY)3'-0"3'-0"3'-0"G-3 W83'-0"7'-0"2'-10" 3'-2"2"2"2"2"3'-8"CRL 6" ROUND STAINLESS STEEL BULLET RESISTANT SPEAK-THRU C.R. LAURENCE MODEL COEW12A WITH N666 SPEAK-THRU AND LEVEL 3 DEAL PROTECTION DEAL TRAY SEE DETAIL 1/4.71 BASIS OF DESIGN: CLOPAY 3700 45 MIN FIRE RATED @ BUNK ROOMS 110-113 45 MIN FIRE RATED G-4 G-4 G-4 BASIS OF DESIGN: CLOPAY 902T G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G-5 G1 H.M. DOOR W/ LITE *(G-2 GLASS) F6.1 EXTERIOR STOREFRONT **ALT BID A-2: FOR DETAILS REFER TO: 5/4.75 3'-6"7'-0"G-2 H.M DOOR W/ LITE *(G-1 GLASS) J1 G-6 H.M. DOOR W/ LITE W/ PROTECT. PLATE (MORGUE SIDE ONLY) T1 2'-0" STAINLESS STEEL PROTECTION PLATE3'-0"DOOR & FRAME NOTES: 1. ALL WOOD DOORS SHALL HAVE GRAIN TO MATCH AND COLOR SHADE TO BE CONSISTENT IN APPEARANCE. 2. PROVIDE LABELED FRAMES AND HARDWARE TO MATCH LABELED DOORS. 3. ALL EXTERIOR HOLLOW METAL DOORS NOT COVERED BY OVERHANG SHALL HAVE PEMKO INTERLOCKING WATER SHED (EXTRUDED ALUMINUM) CONSISTING OF PEMKO #347 AR AND PEMKO #68 AR ATTACHED TO THE HEAD OF THE DOOR. 4. WHEN SUBMITTING HARDWARE SHOP DRAWINGS, HARDWARE SUPPLIER SHALL FURNISH CUT SHEETS ON ALL ITEMS THAT DIFFER FROM THE MANUFACTURER THAT HAS BEEN SPECIFIED IN THESE ARCHITECTURAL DOCUMENTS. 5. PROVIDE STOPS FOR ALL DOORS. PROVIDE OVERHEAD STOP WHERE WALL OR FLOOR STOP IS NOT PRACTICAL OR APPLICABLE. 6. PROVIDE LOCK GUARD FOR ALL EXTERIOR HOLLOW METAL DOORS. 7. ALL SOLID CORE WOOD VENEER DOORS SHALL BE ROTARY SLICED WHITE BIRCH WITH FINISH TO MATCH ARCHITECTURAL SAMPLE. 8. ALL HOLLOW METAL DOORS TO BE HEAVY DUTY 1 3/4" METAL W/ CLOSED TOP & BOTTOM (SEE SPECS). 9. ALL CLOSERS SHALL BE IN ROOM & NOT IN CORRIDOR UNLESS OTHERWISE NOTED. 10. PROVIDE LABELED HOLLOW METAL FRAMES WHERE SCHEDULED, WHERE INSTALLED IN RATED WALLS OR REQ'D BY CODE. 11. SPECIAL HOLLOW METAL FRAMES SHALL BE AS DETAILED OR AS NOTED. 12. REMOVABLE MULLIONS WHERE SCHEDULED WITH HARDWARE SHALL BE PROVIDED BY THE HARDWARE SUPPLIER. PREPARE FRAMES TO RECEIVE REMOVABLE MULLIONS. 13. HOLLOW METAL FRAMES, DOORS & HARDWARE SHALL BE INSTALLED IN STRICT ACCORDANCE WITH MANUFACTURER'S WRITTEN INSTRUCTIONS. DOOR NUMBER DOOR TYPE HARDWARE GROUP NUMBER DOOR FRAME INSTALL NUMBER DOOR DESIGNATION KEY SHOWN ON SHEET 4.11 101 C 2 9 DOOR TAG LEGEND GLASS NOTES: THE FOLLOWING SCHEDULE OF GLAZING TYPES SHALL NOT BE DEEMED ALL INCLUSIVE. PROVIDE ANY OTHER ITEMS OF GLASS NOT LISTED HEREIN OR SHOWN ON THE DRAWINGS AS REQ'D FOR A COMPLETE PROJECT. GLASS IS DESIGNATED BY "G -" NUMBERS AND SHOWN ON THE PLANS AND ELEVATIONS. 1. PPG INDUSTRIES IS USED AS THE BASIS OF DESIGN. 2. ALL INTERIOR GLASS ON DOORS AND WINDOWS TO BE G -1 (UNLESS NOTED OTHERWISE). 3. ALL EXTERIOR GLASS ON DOORS AND WINDOWS TO BE G -2 (UNLESS NOTED OTHERWISE). 4. COORDINATE GLAZING BASED ON ALUMINUM STOREFRONT MANUFACTURER RECOMMENDATIONS. 5. CONSULT ARCHITECT ON TINTED GLAZING COLOR. 6. ALL EXTERIOR DOOR & WINDOW ASSEMBLIES TO BE THERMALLY BROKEN.SCHEDULEPER2"1'-8 1/2"2"1'-0"7 3/8" 3-5/8" MTL. STUDS @ 16" O.C. WITH SOUND ATTENUATION BLANKETS 5/8" TYPE "X" GYP. BD. EACH SIDES 1/2" GYP. BD. MTL STUD BOX HEADER CAULK CONTINUOUS BOTH SIDES DROP-IN DEAL TRAY MTD. IN QUARTZ SURFACE ON 3 LAYERS OF 1/2" PLYWOOD SURFACE W/ BULLNOSE AT ALL EDGES - TYPICAL 1-1/2"x1-1/2"x1/8" 3'-0" LONG STAINLESS STEEL SHELF SUPPORTS SOUND ATTENUATION BLANKETS 5/8" GYP. BD. EACH SIDE 1/2" LEVEL III ARMORCORE 5 3/8" DROP-IN DEAL TRAY: C.R. LAURENCE COMPANY NON-RICOCHET LEVEL III BULLET RESISTANT 16"x12"x2"3'-0" AFF2'-9 1/2" AFFBUILT UP SILL: 2x6 OVER (2) 2x4 METAL RUNNER W8 WINDOW. REFER TO WINDOW SCHEDULE Project No. Sheet No. ALL NOTES APPLY TO ALL DRAWINGS AND ALL TRADES. IT IS THE RESPONSIBILITY OF ALL CONTRACTORS AND TRADES TO COORDINATE THE INSTALLATION OF THEIR WORK WITH THE INSTALLATION OF WORK BY ALL OTHER CONTRACTORS AND TRADES. THE REQUIREMENTS OF THE DRAWINGS, GENERAL REQUIREMENTS AND ALL ITEMS OF THE CONTRACT DOCUMENTS ARE EQUALLY BINDING ON ALL CONTRACTORS AND TRADES. EACH CONTRACTOR IS REQUIRED TO MAINTAIN FULL SETS OF THE CONTRACT DOCUMENTS FOR HIS EMPLOYEES USE ON THE PROJECT TO ASSURE THAT ALL WORK IS PROPERLY COORDINATED AND INSTALLED WITH THE WORK OF OTHER CONTRACTORS AND TRADES. WHENEVER THERE ARE DISCREPANCIES BETWEEN DRAWINGS, OR BETWEEN THE DRAWINGS AND SPECIFICATIONS, OR CONFLICTS WITHIN THE SPECIFICATIONS AND/OR DRAWINGS, AND SUCH DISCREPANCY IS NOT CALLED TO THE ARCHITECT'S ATTENTION IN TIME TO PERMIT CLARIFICATION BY ADDENDUM, THE CONTRACTOR SHALL BASE HIS BID UPON PROVIDING THE BETTER QUALITY OR GREATER OF WORK OR MATERIAL CALLED FOR, SHALL SUBMIT A WRITTEN STATEMENT WITH HIS PROPOSAL NOTING SUCH DISCREPANCIES, AND SHALL SO FURNISH AND INSTALL SUCH BETTER QUALITY OR GREATER QUANTITY UNLESS OTHERWISE ORDERED IN WRITING. GENERAL NOTE Date: Drawn by: Checked by: Revisions: AJP/GAS JRS/GAS 1.800.671.0621www.scn-architects.com719 East Second AvenueGastonia, NC 28054Phone: 704.865.6311Fax: 704.865.00461637 4.71NEW EMS STATION #4 & MEDICALEXAMINER'S QUARTERS FOR ORANGECOUNTYDOOR AND WINDOW SCHEDULE3800 US HWY 70 EFLAND, NC 2724312/31/2021 12/31/2021 FRAME INSTALLATION SCHEDULE Install Number Frame Type Head Jamb Sill Description 1 F9 1/4.72 1/4.72 - HM FRAME @ FIRE RATED WALL 2 F7 2/4.72 2/4.72 - HM FRAME @ 3-5/8" STUD WALL W/ GYP 3 F7 4/4.72 4/4.72 - HM FRAME @ 3-5/8" STUD WALL W/ TILE ON ONE SIDE 4 F9 7/4.72 7/4.72 7/4.72 5 F4 8/4.72 8/4.72 8/4.72 HM FRAME @ BALLISTIC 3-5/8" STUD WALL W/ GYP 6 F3 9/4.72 9/4.72 9/4.72 HM FRAME @ FIRE RATED WALL 7 F10 1/4.74 1/4.74 1/4.74 EXT HM FRAME @ 12" CMU WALL W/ BRICK VENEER 8 F10 2/4.74 2/4.74 - EXT HM FRAME @ 6" STUD WALL W/ BRICK VENEER 9 F5 2/4.73 2/4.73 2/4.73 EXT STOREFRONT @ 6" STUD WALL W/ BRICK VENEER 10 F1 1/4.73 1/4.73 1/4.73 EXT STOREFRONT @ CAST STONE ENTRY 11 F2 1/4.73 1/4.73 1/4.73 EXT STOREFRONT @ CAST STONE ENTRY 12 F6.1 2/4.73 2/4.73 2/4.73 EXT STOREFRONT @ 6" STUD WALL W/ BRICK VENEER 13 - 3/4.73 3/4.73 3/4.73 OVERHEAD DOOR @ 12" CMU WALL W/ BRICK VENEER 14 F7 5/4.72 5/4.72 - HM FRAME @ 6" STUD WALL W/ GYP 15 F4 5&5.1/4.72 5&5.1/4.72 5&5.1/4.72 HM FRAME @ 6" STUD WALL W/ GYP 16 F7 6/4.72 6/4.72 - HM FRAME @ 6" STUD WALL W/ TILE ON ONE SIDE 17 F7 3/4.72 3/4.72 - HM FRAME @ FIRE RATED WALL 18 F6 2/4.74 2/4.74 - GLAZING SCHEDULE GLASS TYPE GLASS DESCRIPTION G-1 SOLARBAN 60 SOLARGRAY - 1" INSULATING GLASS W/ TWO PIECES OF 1/4" GLASS AND 1/2" OF AIRPSACE - TEMPERED WHERE REQUIRED G-2 1/4" THICK CLEAR TEMPERED POLISHED PLATE GLASS AS MANUFACTURED BY VITRO INDUSTRIES G-3 SECUR-TEMP+POLY LEVEL 3 15/16" BULLET RESISTANT GLASS BY GLOBAL SECURITY GLAZING (VITRO) G-4 FIRE-LITE PLUS 90 MIN FIRE RATED GLASS IN 90 MIN RATED DOOR/WINDOW ASSEMBLY G-5 OVERHEAD DOOR GLAZING - MANUFACTURER'S UV TINTED INSULATED TEMPERED UNITS TO MATCH VITRO GLAZINGS, TINTED LIGHT GRAY GLASS. G-6 FIRE-LITE PLUS 45 MIN FIRE RATED GLASS IN 45 MIN RATED DOOR/WINDOW ASSEMBLY NOTE: 1. ALL BRAKE METAL TRIM AND FLASHING @ STOREFRONT WINDOWS AND DOORS TO BE BY MANUFACTURER 2. PROVIDE SILL FLASHING/PAN WITH END DAMS BY WINDOW MANUFACTURER AT ALL SILL LOCATIONS (TYP.) 3. REFER TO SHEET 7.10 FOR WOOD AND VINYL DOOR FINISHES 1 1/2" = 1'-0"1 WINDOW DETAIL DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E 1927 South Tryon St., Suite 300, Charlotte NC 28203 Phone: 704-338-1292 ● www.optimaengineering.com North Carolina License Number C-0914 150 Fayetteville St., Suite 520, Raleigh, NC 27601OPTIMA #: 20-0249OFTHIS DRAWING IS AN INSTRUMENT OF SERVICE. THE DRAWING AND THE INFORMATION THEREON IS THE PROPERTY OF OPTIMA ENGINEERING, P.A. ANY REPRODUCTION, ALTERATION, OR USE FOR OTHER THAN THE INTENDED PROJECT, WITHOUT THE WRITTEN CONSENT OF OPTIMA ENGINEERING, P.A. IS EXPRESSLY FORBIDDEN. COPYRIGHT © OPTIMA ENGINEERING P.A. 2021, ALL RIGHTS RESERVED.Project No.Date:1.800.671.0621www.scn-architects.comSheet No.719 East Second Avenue Gastonia, NC 28054 Phone: 704.865.6311 Fax: 704.865.0046 Drawn by:Checked by:Revisions:12/31/211637ORANGE COUNTY EMS STATION #4 & MEDICAL EXAMINER'S QUARTERS 3800 US HWY 70 EFLAND, NC 2724310.40CEILING PLAN - SYSTEMS JWKJWK198DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E Form_SCTNID_CTGRY.XX05165241_OTHER <docindex><index>OTHER</index></docindex> Policy number: 05786709 Underwritten by: Progressive Southeastern Ins Co NAIC Number: 38784 Page of 1 2 January 11, 2022 BROWN PHILLIPS INS 4940-B WINDY HILL DR RALEIGH, NC 27609 1-919-874-0405 Certificate of Insurance Certificate Holder …………………………………………………………………………………………………………………………………………………………………………… Orange County PO Box 8181 Hillsborough, NC 27278 Insured Agent ……………………………………………………………………………………………………………………………………………………………………………PRONET SYSTEMS INC 3200 GLEN ROYAL RD STE 107 RALEIGH, NC 27617 BROWN PHILLIPS INS 4940-B WINDY HILL DR RALEIGH, NC 27609 This document certifies that insurance policies identified below have been issued by the designated insurer to the insured named above for the period(s) indicated. This Certificate is issued for information purposes only. It confers no rights upon the certificate holder and does not change, alter, modify, or extend the coverages afforded by the policies listed below. The coverages afforded by the policies listed below are subject to all the terms, exclusions, limitations, endorsements, and conditions of these policies. Liability coverage may not apply to all scheduled vehicles. Policy Effective Date: Policy Expiration Date: ……………………………………………………………………………………………………………………………………………………….. Jan 3, 2023Jan 3, 2022 Insurance coverage(s) Limits ………………………………………………………………………………………………………………………………………………………..Bodily Injury/Property Damage $1,000,000 Combined Single Limit ………………………………………………………………………………………………………………………………………………………..Any Auto Bodily Injury/Property Damage $1,000,000 Combined Single Limit ………………………………………………………………………………………………………………………………………………………..Uninsured/Underinsured Motorist $1,000,000 Combined Single Limit ………………………………………………………………………………………………………………………………………………………..Uninsured Motorist Property Damage (included in combined single limit w/$100 Ded) Description of Location/Vehicles/Special Items Scheduled autos only……………………………………………………………………………………………………………………………………………………….. 2003 FORD 1FTNE24L63HB56220 ECONO/CLUB WGN Comprehensive $500 Ded Collision $1,000 Ded ……………………………………………………………………………………………………………………………………………………….. 2006 FORD 1FTRF12WX6NA28557 F150 Comprehensive $500 Ded Collision $1,000 Ded ……………………………………………………………………………………………………………………………………………………….. 2006 JEEP 1J8HG58286C245131 COMMANDER Comprehensive $500 Ded Collision $1,000 Ded ……………………………………………………………………………………………………………………………………………………….. 2013 FORD NM0LS7DN6DT155594 TRANSIT CONNECT Comprehensive $500 Ded Collision $1,000 Ded ……………………………………………………………………………………………………………………………………………………….. 2014 JEEP 1C4RJFCG7EC272289GRAND CHEROKEE 4 Continued DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E <docindex><index>OTHER</index></docindex> Policy number: 05786709 PRONET SYSTEMS INC Page of 2 2 Comprehensive $500 Ded Collision $1,000 Ded ……………………………………………………………………………………………………………………………………………………….. Stated Amount 2016 MERCEDES-BENZ GLE400 4JGDA5GB9GA678426 $52,000 Comprehensive $500 Ded Collision $1,000 Ded ……………………………………………………………………………………………………………………………………………………….. Stated Amount 2017 FORD T-250 TRANSIT V 1FTYR2YG3HKA41115 $27,000 Comprehensive $500 Ded Collision $1,000 Ded ……………………………………………………………………………………………………………………………………………………….. 2007 FORD 1FTNE14W37DB26903 ECONO/CLUB WGN Comprehensive $500 Ded Collision $1,000 Ded ……………………………………………………………………………………………………………………………………………………….. 2019 JEEP 1C4RJFAG2KC565077 GRAND CHEROKEE Comprehensive $500 Ded Collision $1,000 Ded Please be advised that the certificate holder will not be notified in the event of a mid-term cancellation. Form 5241 (05/16) DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E Ken Lawson Jr SHOULD ANY OF THE ABOVE DESCRIBED POLICIES BE CANCELLED BEFORE THE EXPIRATION DATE THEREOF, NOTICE WILL BE DELIVERED IN ACCORDANCE WITH THE POLICY PROVISIONS. INSURER(S) AFFORDING COVERAGE INSURER F : INSURER E : INSURER D : INSURER C : INSURER B : INSURER A : NAIC # NAME:CONTACT (A/C, No):FAX E-MAILADDRESS: PRODUCER (A/C, No, Ext):PHONE INSURED REVISION NUMBER:CERTIFICATE NUMBER:COVERAGES IMPORTANT: If the certificate holder is an ADDITIONAL INSURED, the policy(ies) must have ADDITIONAL INSURED provisions or be endorsed. If SUBROGATION IS WAIVED, subject to the terms and conditions of the policy, certain policies may require an endorsement. A statement on this certificate does not confer rights to the certificate holder in lieu of such endorsement(s). THIS CERTIFICATE IS ISSUED AS A MATTER OF INFORMATION ONLY AND CONFERS NO RIGHTS UPON THE CERTIFICATE HOLDER. THIS CERTIFICATE DOES NOT AFFIRMATIVELY OR NEGATIVELY AMEND, EXTEND OR ALTER THE COVERAGE AFFORDED BY THE POLICIES BELOW. THIS CERTIFICATE OF INSURANCE DOES NOT CONSTITUTE A CONTRACT BETWEEN THE ISSUING INSURER(S), AUTHORIZED REPRESENTATIVE OR PRODUCER, AND THE CERTIFICATE HOLDER. OTHER: (Per accident) (Ea accident) $ $ N / A SUBR WVD ADDL INSD THIS IS TO CERTIFY THAT THE POLICIES OF INSURANCE LISTED BELOW HAVE BEEN ISSUED TO THE INSURED NAMED ABOVE FOR THE POLICY PERIOD INDICATED. NOTWITHSTANDING ANY REQUIREMENT, TERM OR CONDITION OF ANY CONTRACT OR OTHER DOCUMENT WITH RESPECT TO WHICH THIS CERTIFICATE MAY BE ISSUED OR MAY PERTAIN, THE INSURANCE AFFORDED BY THE POLICIES DESCRIBED HEREIN IS SUBJECT TO ALL THE TERMS, EXCLUSIONS AND CONDITIONS OF SUCH POLICIES. LIMITS SHOWN MAY HAVE BEEN REDUCED BY PAID CLAIMS. $ $ $ $PROPERTY DAMAGE BODILY INJURY (Per accident) BODILY INJURY (Per person) COMBINED SINGLE LIMIT AUTOS ONLY AUTOSAUTOS ONLY NON-OWNED SCHEDULEDOWNED ANY AUTO AUTOMOBILE LIABILITY Y / N WORKERS COMPENSATION AND EMPLOYERS' LIABILITY OFFICER/MEMBER EXCLUDED? (Mandatory in NH) DESCRIPTION OF OPERATIONS below If yes, describe under ANY PROPRIETOR/PARTNER/EXECUTIVE $ $ $ E.L. DISEASE - POLICY LIMIT E.L. DISEASE - EA EMPLOYEE E.L. EACH ACCIDENT EROTH-STATUTEPER LIMITS(MM/DD/YYYY)POLICY EXP(MM/DD/YYYY)POLICY EFFPOLICY NUMBERTYPE OF INSURANCELTRINSR DESCRIPTION OF OPERATIONS / LOCATIONS / VEHICLES (ACORD 101, Additional Remarks Schedule, may be attached if more space is required) EXCESS LIAB UMBRELLA LIAB $EACH OCCURRENCE $AGGREGATE $ OCCUR CLAIMS-MADE DED RETENTION $ $PRODUCTS - COMP/OP AGG $GENERAL AGGREGATE $PERSONAL & ADV INJURY $MED EXP (Any one person) $EACH OCCURRENCE DAMAGE TO RENTED $PREMISES (Ea occurrence) COMMERCIAL GENERAL LIABILITY CLAIMS-MADE OCCUR GEN'L AGGREGATE LIMIT APPLIES PER: POLICY PRO-JECT LOC CERTIFICATE OF LIABILITY INSURANCE DATE (MM/DD/YYYY) CANCELLATION AUTHORIZED REPRESENTATIVE ACORD 25 (2016/03) © 1988-2015 ACORD CORPORATION. All rights reserved. CERTIFICATE HOLDER The ACORD name and logo are registered marks of ACORD HIRED AUTOS ONLY 06/23/2022 Lawson Insurance Group, Inc. 6512 Six Forks Rd # 101 Raleigh NC 27615-6561 Leslie McCoy 919-846-2090 919-846-2438 leslie.mccoy@lawsonins.com ProNet Systems, Inc 3200 Glen Royal Rd Raleigh NC 27617-7419 Cowbell Cyber Inc 41394 Travelers Nationwide Mutual Insurance Company 23787 Nationwide Mutual Fire Insurance Company 23779 C 6 6 6 6 Y Y ACPGLO2242994383 02/22/2022 02/22/2023 1,000,000 100,000 5,000 1,000,000 2,000,000 2,000,000 D 6 6 6 ACPCAF2242994383 02/22/2022 02/22/2023 4,000,000 4,000,000 B Y Y UB0S866703 04/28/2022 04/28/2023 6 1,000,000 1,000,000 1,000,000 A Commercial Cyber and Privacy Liability OBD-CB-SJFOWXKHD 06/01/2022 06/01/2023 Aggregate limit 1,000,000 Orange County is included as additional insured (CG 20 33) and Waiver of Subrogation applies per Blanket Contractors Enhancement Endorsement (CG 72 88) under the general liability policy (please refer to attachments). The Umbrella/Excess Liability policy is "follow form". Blanket Waiver of Subrogation also applies to the workers compensation policy (please refer to attachments). P.O. Box 8181 Hillsborough NC 27278 Orange County DocuSign Envelope ID: 69D65917-B03B-48EF-AB90-57368B9A583E